Need Replacement For Carrier RV Air Conditioner

Question

Question:

I need a replacement motor or new unit for a Carrier RV air conditioner Model68RV14113A ducted unit. 115V AC, 60Hz, 1 Phase. Please advise

asked by: Jessica M

0

Expert Reply:

Hey Jessica, thanks for reaching out. Unfortunately, replacement motors and many other service parts for the old Carrier RV air conditioners are no longer available, so if the motor has failed, the practical solution is to replace the entire AC system. Since Carrier exited the RV air conditioner market years ago, support and replacement components have become increasingly difficult to find.

The Advent Air System # ADV95SR is an excellent replacement option. It includes the rooftop unit, air distribution box, thermostat, and start capacitor, giving you a complete, modern system rather than trying to piece together repairs on an obsolete unit. Replacing the entire system also ensures all of the components are designed to work together, which improves reliability and makes future service much easier.

Do you currently have a ducted ceiling system with a wall thermostat, or is your Carrier using a ceiling-mounted control assembly?

expert reply by: Jesse M

0

Advent Air RV Air Conditioner System - Single Zone - 13,500 Btu - White - R32
(click to enlarge)

Jessica M.

6/16/2026

We have a ducted system with a wireless remote.

Jesse M.

6/16/2026

@JessicaM Ok gotcha. The # ADV95SR system I mentioned will work with a ducted system but it uses a wall thermostat. If you want a ducted system that uses a wireless remote, take a look at the following: - Furrion Chill Cube RV Air Conditioner w Air Distribution Box - Ducted - 18,000 Btu - Black # FR39TD

Jess M.

6/16/2026

@JesseM my unit has a heat pump as well, what unit would you suggest that does A/c and heat pump?

Jesse M.

6/17/2026

@JessM Yep we have that option too. Here is what I recommend: - Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump - Ducted - 18K Btu - Black - R32 # FR97TQ

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 9

Hey Kenny, welcome back! The reason for that note is because all of the new systems since 2025 use R32 refrigerant due to EPA regulations. Any 2024 and older systems use R410A and their parts are not compatible with the R32 units. It doesn't mean…

view full answer...

Answer 10

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Need Replacement For Carrier RV Air Conditioner

Continue Researching