Availability of Disc Brakes With 8 on 6-1/2 Bolt Pattern for 6k Axle
Updated 04/28/2026 | Published 04/25/2026
Products Featured in This Question
Question:
Do you have a disc brake kit for a 6000 pound 8 on 6.5 lug pattern? The kits i see on here are all 6 lug. Will the kit for a 7k axle fit?
asked by: Tim N
Expert Reply:
Hey Tim! Are you looking for slip-on rotors like the # DE82FR you were looking at? The 7k disc brakes fit the same brake flange so you can use them with your setup. The correct kit depends on your wheel bolt diameter. If you have 9/16" wheel bolts you need # DE49YR and for 1/2" wheel bolts # DE34VR. Both are designed to fit idler hubs with an 8 on 6-1/2 bolt pattern.
What kind of trailer do you have?
(click to enlarge)
Product Page this Question was Asked From
DeeMaxx Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 8 on 6-1/2 Inch
- Rotor
- 1/2 Inch Studs
- 7000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- DeeMaxx
more information >
Continue Researching
- Q&A: Improving the Ride Quality on a Triple Axle Trailer
- Q&A: Electric Over Hydualic Disc Brake Setup for 2020 Grand Design Momentum 376THS
- Q&A: Can the Integrated Brake Controller of a 2011 Dodge Ram 3500 Activate a Carlisle EOH Brake Actuator
- Q&A: How Much Pressure Does an Electric Over Hydraulic Trailer Brake Actuator Put Out
- Q&A: Replacement AC For Dometic Brisk Air II 57915.751 Model
- Q&A: Idler Hubs and DeeMax Slip On Disc Brake Kit for 2019 Big Country 3360ss
- Q&A: Measurement on Dexter Axle 7-Leaf Slipper Spring w/ Hook End for 8,000-lb Trailer Axles
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller Installation: Starting from Scratch
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box