Replaces the stainless steel bolt for your 7K DeeMaxx disc brake bracket. 3/8"-16 x 1-1/4"
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this replacement stainless steel bolt for the DeeMaxx disc brake caliper brackets on 6,000 pound and 7,000 pound axles. Now this stainless steel bolt is used to attach the DeeMaxx disc brake caliper brackets to a 6,000 pound or 7,000 pound trailer axle. Now will also require the use of stainless steel Nyloc nuts, which do sell separately on our website. They go by a part number of DE62WR And just to show you what that is, I happen to pull one of those and there's the Nyloc nut that's used with this bolt to hold your brackets in place. Now the caliper bracket attaches to the brake mounting flange on a 6,000 pound or 7,000 pound axle with usually five bolts of nuts.
This part here is just for a quantity of one bolt. Now the thread size on this is 3/8" by 16 threads per inch. The overall length, which is gonna be measured from under the head at the very end of the bolt, you can see is right at 1 1/4" long. And the hex head size of a socket that'll fit this is 9/16". But that's gonna do it for a look at the replacement stainless steel bolt for the DeeMaxx disc brake caliper brackets on 6,000 pound and 7,000 pound axles.
.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.