bing tracking image
  1. Trailer Brakes
  2. DeeMaxx
  3. Disc Brakes
  4. 7000 lbs Axle
  5. Rotor
  6. 16 Inch Wheel
  7. 16-1/2 Inch Wheel
  8. 17 Inch Wheel
  9. 17-1/2 Inch Wheel
DeeMaxx Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K
DeeMaxx

DeeMaxx Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K

Part Number: DE34VR
In Stock
$486.75
Trailer Brakes
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Upgrade to disc brakes with these slip-on rotors and get safer, more consistent braking. Tow your boat and launch in either fresh or brackish water? The Maxx coating on this brake kit is even better than Dacromet for superior corrosion protection. Great Prices for the best trailer brakes from DeeMaxx. DeeMaxx Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K part number DE34VR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (50)
  • Q & A (0)
  • Videos (5)
  • Photos

DeeMaxx Trailer Brakes - DE34VR

  • Disc Brakes
  • 7000 lbs Axle
  • Rotor
  • 16 Inch Wheel
  • 16-1/2 Inch Wheel
  • 17 Inch Wheel
  • 17-1/2 Inch Wheel
  • Marine Grade
  • 8 on 6-1/2 Inch
  • DeeMaxx
  • 1/2 Inch Studs

Upgrade to disc brakes with these slip-on rotors and get safer, more consistent braking. Tow your boat and launch in either fresh or brackish water? The Maxx coating on this brake kit is even better than Dacromet for superior corrosion protection.


Features:

  • Lets you upgrade your trailer from an idler axle to a braking axle for superior performance
  • Great for towing and launching your boat in fresh or brackish water
    • Corrosion-resistant Maxx coat finish on rotors, calipers, and brackets has a salt spray rating over 1,000 hours
    • Drainage holes in the hat section allow water to drain easily, further minimizing corrosion
  • Offers dramatically shorter stopping distances and smooth, controlled braking
    • Ceramic brake pads increase stopping power
    • Stainless steel piston provides fast, responsive braking
  • Requires minimal maintenance, saving you time and money
    • Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes
  • Slip-on, over-the-hub rotors fit over standard idler hubs and are held in place by your existing wheel bolts
    • No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged
    • Vented design dissipates heat faster to prevent premature brake pad wear
    • High-quality, automotive-grade construction is long-lasting
  • Includes assemblies needed to upgrade brakes on 1 axle
    • 2 Slip-on rotors, calipers, and brackets
    • Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes


Specs:

  • Axle capacity: 7,000 lbs
  • Bolt pattern: 8 on 6-1/2"
  • Rotor diameter: 13-1/8"
  • Piston diameter: 2-1/2"
  • Brake flange configuration: 5 bolt
  • Wheel bolt diameter: 1/2"
  • 7-Year warranty


The DeeMaxx Difference

Close-up image of DeeMaxx disc brake installation

When brakes retain heat, they are more likely to experience brake fade, or loss of braking power. DeeMaxx addresses this problem by incorporating drainage holes in the hat section of each vented rotor to provide even more ventilation than other brands. Combining these holes with the conventional venting allows DeeMaxx brakes to disperse heat faster. They're also able to shed moisture better, leading to less internal corrosion. The result is cooler-running, longer-lasting brakes that offer consistent performance.


DeeMaxx brakes are the only trailer brakes to satisfactorily pass the high standards of the SAE J2681 brake test. This test is designed to evaluate the friction performance of automotive brakes, so DeeMaxx's passing grade should tell you just how well made these products are.


Close-up image of DeeMaxx disc brake installation of brackets

The patented design of the caliper mounting bolt and sleeve makes installation easier while ensuring that the sleeves stay in place within the caliper. In addition, the side-support design of the caliper mounting bracket puts all of the weight on the bracket instead of on the bolts. This reduces premature wear and extends the life of the bolts, further ensuring optimal performance.


DeeMaxx brakes perform well even in the most demanding environments, which is one of the many reasons why they are preferred by law enforcement agencies like the Texas State Patrol, U.S. Border Patrol, and U.S. Coast Guard.


Great for Campers and Boat Trailers

If you own a trailer, you know that rust and corrosion will eventually creep up no matter where you tow, especially if your equipment doesn't have any kind of protective coating or plating. But if you tow your camper or trailer in the Midwest during the winter, or if you ever launch your boat in brackish water, you'll need even more protection because of the salt you'll likely encounter.


disc brake with signs of heavy rust and corrosion

The Maxx coating on the rotors, calipers, and brackets in this kit helps to ensure that DeeMaxx brakes don't end up looking like the one pictured above. It offers great corrosion protection, even with occasional use in freshwater and saltwater. Rust-resistant coatings are graded according to a salt spray rating. Basically, this rating shows the amount of time it takes for a material to show signs of corrosion when exposed to pure, continuous salt spray. Zinc plating typically begins to deteriorate after about 100 hours. Dacromet usually lasts for around 300 to 400 hours. DeeMaxx's Maxx coating lasts for more than 1,000 hours in the salt spray test.


The environment this test creates is much harsher than anything you'll ever experience in your journeys, but it provides a testament to how well DeeMaxx brakes resist rust and corrosion.


If you're living the salt life full-time or you live right on the coast, you'll probably want to invest in something that offers even more protection, like DeeMaxx kits that include stainless steel components for the ultimate in corrosion resistance.


Get a Safer, More Comfortable Ride

Say goodbye to the days of your truck being pushed and pulled by your trailer. Disc brakes provide a safer, more comfortable ride than drum brakes. They offer shorter stopping distances and deliver consistent braking - even at highway speeds. So, you won't have to worry about things crashing around in your trailer or camper next time you reach unexpected traffic on the highway or debate if you can actually stop before that yellow light turns red.


Save Time and Money

More and more people are switching their trailers over to disc brakes. Not only do disc brakes provide more controlled braking than drum brakes, but they also save you money by having fewer parts to maintain.


side-by-side comparison of an electric drum brake and a hydraulic disc brake

Unlike drum brakes, which have springs, magnets, and shoes that may need to be continually adjusted or replaced, disc brakes are virtually maintenance-free. There are no springs, cables, or other little components that you'll need to worry about failing.


close-up image of DeeMaxx disc brake caliper parts

The brake pads will naturally wear down, so eventually you'll have to replace them. But these pads are also way easier to replace than drum brake shoes. And the caliper - where the pads are housed - is located on the outside of the brake assembly. This means you just have to remove that one part to replace the brake pads rather than having to remove the entire assembly like you would with drum brakes. The same is true for the slip-on rotors in this kit.


instructions on how to bleed brakes laser etched into the back of a DeeMaxx disc brake caliper

DeeMaxx also has simple instructions for bleeding the brakes laser-etched on the back of the calipers. This convenient time saver means you'll always have the guidance you need on hand when the time comes for maintenance.



DBSO-7K-MAXX Dee Maxx Slip Over Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 7,000 lbs





Video of DeeMaxx Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for DeeMaxx Disc Brake Kit Review

Hello neighbors, it's Brad here at etrailer, and today we're taking a look at the DeeMaxx line of disc brakes. Now these are gonna be available in a bunch of different configurations from axles rating from 3,500, all the way up to 16,000. It's also gonna be available in a number of different coatings as well as a number of different bolt patterns. So you're gonna be able to match your needs of your trailer with these disc brakes. Now today we have these installed on a fifth wheel camper with 7,000 pound axles, and this is a great application for any RV. But also you're gonna find these on horse trailers, utility trailers, and also marine trailers.

So that means that it's able to be used with a surge actuator as well as your electric over-hydraulic brake actuator. Now what's gonna sets these apart is definitely gonna be the rotor design. And you're gonna notice right away, we have these holes here on our hat of the rotor. And what makes that a little bit more unique than your typical one is not only is it gonna cool because that heat is gonna be able to kind of dissipate through those holes, but also it's really important for anyone that does any marine usage of their trailer, or even driving in inclement weather where water kind of gets caught in the backside of this. And the problem with other rotors is that water just kind of spins around, and as you park, it's gonna sit at the bottom, and if you park your trailer for a while that's gonna eat away at that rotor.

And this actually allows it, for it to drain out. Another great part about this is when they're able to put the coating on the rotor it gets nice and uniform, there's no drip marks. So again, you get a little bit more uniformity and overall better quality. Now speaking of that coating, depending on which DeeMaxx brace you go with they're gonna have a zinc coating. Here we have our Dacromet coating and also there's gonna be stainless steel.

Now what also sets these apart and really comes down to being heavy duty is gonna be a robust caliper design. It's 28% thicker than your standard calipers out there and it's gonna promote a little bit more even pad wear. It also prevents the caliper from splitting. So over time these can kind of get thin here, and when that cracks, well there goes your brakes. And many times with other brakes you are kind of left with only a few different ways to mount up where your caliper's gonna go.

And you can see there's plenty of holes available. You can really mount this in a number of different ways, so for clearance issues, that makes it nice and easy. You also have two bleed screws so you're able to bleed it from a number of different locations. So you are able to do that at 120 degrees, whereas normally when you're bleeding, you're stuck with 90 degrees, and that's just gonna kind of limit you and just make it a little bit more tricky as far as getting these installed. So here on our caliper you can see our two bleed screws here. What's really nice too is they've laser etched on the back here to let you know that you have both of these able to bleed. But also they give you the torque settings for when putting your caliper bolts in place. So that's really nice if you do take these off and you go, I forget the torque setting, no problem, it's on here. And that really just kind of goes to the quality of their products. They've really taken a lot of time to make sure that there's quality in every step of the way. And that even goes to your brass fitting here. It's quite a bit thicker than some of the other ones you've seen, and you're able to actually get a wrench on here if you have to rotate it and not really worry about cracking it. Some of your other brass fittings, you gotta be real careful 'cause that can snap. This one's definitely a little bit more robust Now depending on your application some of them will come standard with Kevlar brake pads. And your standard pads are gonna be great, but having Kevlar means that you're gonna have much longer life. And also the design of the brake pads is really nice too because you have these metal dowels here as well as a kind of unique clip here, and that just really makes sure that these aren't gonna be popping out anytime. So with that pressure against the rotor it really does just kind of keep this in place. You can see once we have this snapped in, those are gonna keep these nice and aligned. The internal seals on our brake piston are going to be EPD and rubber, which is definitely made for holding up to a lot of high temperatures as well as cold temperatures. And it is really great stuff. It's made in the U.S., and that's gonna really prolong the life of the piston and really the main moving mechanism of your brakes. So that means that your caliper you shouldn't have to replace for a long time. Now your dust boot here on your grease cap is gonna be made of silicone. This can be exposed to UV and it's not gonna break down over time, as we've seen some of the other rubbers that they use will start to get brittle and crack and then you have grease coming out of them. Now here we have an integrated hub and rotor one piece assembly, which is really nice. It's gonna keep any uneven wear on the rotor down to a minimum because you don't have that kind of moving around. It's all one piece, and that's just gonna keep it nice and solid. You do have the availability to also get it in just a standard rotor as well. Now when picking up your disc brakes, it does come in a quantity of two so you'll have enough for one axle. So if you have a tandem or triple axle you'll just need to order accordingly to make sure that you have them all. Now, as far as the other components that you'll need you are gonna need to pick up hydraulic line kit and also an actuator. And when choosing an actuator make sure you get one that's rated for 1,600 PSI minimum for these to operate. Now if you're wondering about the quality and just overall how they perform compared to those out out on the market, they've done third party independent testing and these, with flying colors, passed. They've also passed plenty of SAE tests that other brake manufacturers aren't actually required to do, and they're also contracted by the military for some of their vehicles to use them, so if that's not enough, we've also done a little bit of a test on our own with the electric drum brakes before and we're gonna do an after. So stick around and see how it performs. It's not exactly out on the highway testing, but what we've done is we've gotten up to about 15 miles per hour in our parking lot and just used the trailer brakes at full gain and allowed the drum brakes to do what they can to stop it. Now we've gone ahead and done the exact same breaking test, now just with our DeeMaxx brakes installed. Now for a quick visual reference, you can see our cone over here to my left and that's where the front of the truck was before with those drum breaks. You can kind of see where his truck is now, so obviously it's made a huge difference. We went from 117 foot down to 53, so more than half of what we had before. Imagine that being a car on the highway and you have to make a quick movement, instead of being there, you can be here. And that was a look at the line of DeeMaxx disc brakes.

Customer Satisfaction Score:


Customer Reviews

DeeMaxx Disc Brake Kit - 13" Rotor - 8 on 6-1/2 - Maxx Coating - 1/2" Bolts - 7K - DE34VR

Average Customer Rating:  4.7 out of 5 stars   (50 Customer Reviews)

Upgrade to disc brakes with these slip-on rotors and get safer, more consistent braking. Tow your boat and launch in either fresh or brackish water? The Maxx coating on this brake kit is even better than Dacromet for superior corrosion protection.

by:

Came in quick for installation



by:



by:

The parts themselves are great, but the packaging was AWFUL. A big box with two rotors in it, with loose calipers and pads banging around inside with no additional packaging material to cushion these parts. Disappointed in the etrailer customer service team, who passed the blame to the shippers. I'm sorry, but the shippers didn't package these...etrailer did.



by:

Product was as expected, good quality braking system, installed easily in about 1-2 hours per wheel. Shipping and ordering was quick and easy. Time will tell more after installing on my fresh water boat trailer.
Unfortunately, it did not clear my 15” wheels properly, as indicated in the product description. I found by adding a 1/4” wheel spacer, that was just enough to get the clearance needed to prevent the calipers from rubbing on my 15” rims. (I have also seen others say that they used a grinder to take about 1/4” off the caliper body to get them to clear). This is the only reason for 4/5 stars.



by:

rapid delivery, boxed well and brakes look of good quality. E trailer is so easy to order from and responsive.



by:

Good product. Great service. Some damage occurred during shipping, but replacement parts were shipped free of charge.



by:

Heavy duty mounting brackets and calipers. Very high quality.



by:

Excellent brakes for my boat trailer.



by:

WOrks very good. Fit on a 15" rim were not good. The site said any 15, 16 or larger. The calibers drag on the inside of rims. I had to choose to go larger size rims but did not want to go larger because the hight I was at lauching boat now. Called tech support, they worked wirh manufacture and was told to grind dowm edge or caliber. It has extra metal from mold at factory. I did about 1/4 inch end to end and all is good with about 1/8 clearaance now.



by:

The package fit my boat trailer perfectly. Installation was fairly easy and I am ver pleased with the product. thanks



by:

DeeMaxx Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Maxx Coating - 3,500 lbs came fast and well packed. Thank you



by:

I previously purchased Deemax rotors, calipers with pads and wouldn’t fit my mounting brackets on my venture trailer. I called Stacy at customer service at etrailer and she worked with me and my issues to return the previous shipment (awaiting credit) . She had me buy 2 sets of the brake kits by Deemax which is for 4 wheels of rotors, calipers with pads and mounting brackets and they are great . The brakes and rotors on my trailer were shot, rusted beyond repair and I’ve started to tear them out and replace them all , the rusted bolts are they worst I’ve dealt with- see the photo for the look of the new rotors , bracket and still installing calipers.



by:

The cap to the brake fluid broke in shipping wondering if u can send a new one



by:

quick turnaround and good pricing. Will use again.



by:

Prefect fit



by:

Quick delivery



by:

Now just need to install



by:

Easy to order. Shipped and showed up f ast.



by:

Everything about this order went extremely well. Rotors and brakes are a major improvement of the standard equipment that came with Venture trailer. Simple to install and time will tell on longevity.



by:

Fast, nice, happy



by:

DeeMaxx parts seem to last longer in our saltwater than the Kodiak. I had both until the Kodiaks locked up. I bought this set to replace the Kodiaks that were a couple years newer than the Deemaxx.



by:

item looks to be excellent quality.!



by:

Perfect fit to the original trailer bra kes!



by:

This particular combination was back ordered. Trevor kept me informed all the way through till it was delivered to my house. It was great working with him.



by:

Absolutely a great experience. Neil is a high communicator, which I need. He helped me correct my order and shipped immediately. I now know where to get my trailer stuff. Thanks
Tony


25
50
Show More Reviews

See what our Experts say about this DeeMaxx Trailer Brakes


Info for this part was:

Employee Lindsey S
Edited by:
Lindsey S
Employee Dustin K
Video Edited:
Dustin K
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Michael B
Installed by:
Michael B
Employee Bradley B
Test Fit:
Bradley B
Employee Ryan F
Written by:
Ryan F

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.