Looking for Replacement Brake Pads for Hydrastar 7k Disc Brake Kit

Question

Question:

i have a hydrostar hyd disc brake kit HSE7K-T1SO. i need some replacement brake pads. which ones would i look at?

asked by: marty b

0

Expert Reply:

Hey Marty, the correct disc brake pad kit you need would be the part # HYD85FR that you referenced. This is correct ceramic pads for 7k Hydrastar kits like the part # HSE7K-T1SO that you have. How do you like the Hydrastar kit? We typically recommend it the highest when people ask for disc brake kits.

expert reply by: Jameson C

0

Answer 1

Hey Duane, we have the perfect kit for you with the part #HYD54FR which comes with everything needed to convert a triple axle trailer to electric over hydraulic disc including the best actuator, all brake lines, breakaway kit etc. Only thing worth…

view full answer...

Answer 2

Hello Michael, thanks for reaching out. We should have exactly what you need to convert your Alliance trailer to disc brakes. There is no way to use the VIN to look up exactly what you need though. There just isn't a universal VIN database for…

view full answer...

Answer 3

Here are the brake bleeding instructions directly from the manual for the Hydrastar Actuator #HBA16. This process needs to be followed to ensure you do not damage the actuator. BLEEDING AND ADJUSTING THE BRAKES 1. It typically is much easier to bleed…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Kent! Your Alliance Avenue already has some great suspension components with the MORryde CRE3000 equalizers, wet bolt kit, and Rota-Flex pin box. I wouldn't replace any of those unless you're experiencing a specific problem. The next…

view full answer...

Answer 12

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Looking for Replacement Brake Pads for Hydrastar 7k Disc Brake Kit

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching