Brake Controller Recommendation to Replace Tekonsha Pilot

Question

Question:

I have a 2023 Hyundai Santa Cruz towing an Aliner Expedition. Currently I have a Tekonsha Pilot brake controller and would like to upgrade to a plug-in proportional controller preferably that fits into the current Pilot dash mount. The Prodigy P2 seems a good option but I dont see that on your site. Do you still sell it? If not what would you recommend I look at? Thanks.

asked by: Brian M

0

Expert Reply:

Hey Brian, so the company that makes the P2 is currently out of business (we hope they come back) so while that's not an option we do have the Redarc Tow Pro Liberty part # RED52VR which I think you'd really be happy with although it does not fit into same dash mount as what you have. This puts a small knob on your dash and gives you a really great performing proportional brake controller. Also worth mentioning is that only the brake controller you have now would fit the Pilot mounting bracket you have.

expert reply by: Jameson C

0

Tow Pro Knob
(click to enlarge)

Brian M.

4/25/2026

Thanks!. When I followed the link provided it stated the Redarc Tow Pro Liberty RED52VR does not fit a 2023 Hyundai Santa Cruz. Is this because an adapter cable is required? The RED52VR terminates with bare wires, the Hyundai wiring harness has a plug.

Jameson C.

4/27/2026

@BrianM Sorry for confusion on that but it will work for you. It's universal and would install by wiring directly to your brake controller wiring after removing that plug. We don't have anything that would plug into it.

Brian M.

5/12/2026

@JamesonC Great recommendation! We've just been on our first trip with this controller and it worked seamlessly. A big step up from the Tekonsha Pilot time delay controller fitted when we purchased our trailer. The RED52VR main unit mounted easily on the dashboard under the steering wheel, with the knob wired into the fuse access cover. Since Redarc don't provide an adapter plug for the Santa Cruz, and the plug in the Santa Cruz wiring harness is too short to access easily for splicing, I purchased the Curt adapter for the Santa Cruz (C77BR), cut off the Curt plug, then spliced the remaining Santa Cruz plug to the universal Redarc cable bare wires, to make it plug and play.

Jameson C.

5/12/2026

@BrianM Glad it's working well for you! It's a pretty awesome brake controller!

Answer 1

If you want to add a brake controller to your 2024 Santa Cruz you have to start by adding a 7-way. Since you have the factory tow package you can use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package #C68JR. This plugs into the tow…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 5

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 6

You're right, the mounting bracket is unique (in a good way) for the Curt TriFlex NEXT Trailer Brake Controller #C24VV. The bracket is smaller and all you do is put the included adhesive tape on the bracket and stick it wherever you like under…

view full answer...

Answer 7

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 8

Hey Scott! Your 2026 Ford Ranger may or may not have a brake controller port/plug, even with the tow package. There will be four wires coming out of a large wire harness by the driver side firewall, left of the brake pedal, which can be wired to the…

view full answer...

Answer 9

Hey Eddy, this is a great question but for the 2023 Chevrolet Traverse with the factory tow package, there is factory brake-controller wiring behind the driver's-side kick panel, but there is not a plug-and-play connector/adapter available for…

view full answer...

Answer 10

Hi Charles! I completely understand wanting to avoid wiring. It can be a real pain, The good news is that the Redarc Tow Pro Liberty Brake Controller with Custom Harness #RED74CR includes a wiring harness designed to connect to the factory brake…

view full answer...

Answer 11

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 12

Using the cut off wiring harness you have for the P3 part #90195 you will wire it to the brake controller wiring of your 2023 Ford Ranger which is sticking out of the large wire harness that goes through the driver's side firewall, left of the…

view full answer...

Brake Controller Recommendation to Replace Tekonsha Pilot

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching