TorkLift Tie Downs for 2018 Ram 2500 With No Running Boards

Question

Question:

Can I run the TL29DR on my 18 Ram 2500 with no running boards ?

asked by: Jerry G

0

Expert Reply:

Hey Jerry! The # TL29DR uses the tie-downs designed for models with running boards. Since you do not have running boards on your Ram 2500 you need the TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL37ZV. You will also need turnbuckles like the TorkLift Locking FastGun # TLS9529-2-LK to complete your setup.

What kind of camper are you hauling?

expert reply by: Robin H

0

TorkLift Tie Downs
(click to enlarge)

Answer 1

Hey Ks, Torklift only sells their tie-downs as a kit with new mounting hardware and everything. So for your 2017 Ram 2500 you'd need the kit #TL29DR you were looking at. What kind of truck bed camper do you have?

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 6

Hey Adam, thanks for reaching out. Unfortunately, the Reese Titan hitch extender 45018 is currently unavailable. Reese's parent company went belly-up and they stopped shipping and producing product. It sounds like the company was recently bought…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Hi Clint, welcome back The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182898 are likely what you are looking for and will be a good in between option (they are actually pretty nice and should last a good long…

view full answer...

Answer 9

Hi Tim, That's a great question! While Timbrens and SumoSprings are both suspension enhancements, they perform differently depending on how much weight you're towing/hauling and how often you're planning on towing/hauling. The only…

view full answer...

Answer 10

Hey Daniel, thanks for all of the info you listed on your trailer axle. Based on seeing all of that the correct parts are what you mentioned. The brake assembly set part #23-464-465 is correct as well as the hub/drum part #42866UC3-EZ. Did you have…

view full answer...

Answer 11

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 12

There are a couple things to consider between using the Torklift StableLoad #TLA7200 and air bags on your 2022 Ford F-350 Super Duty when transporting your in-bed camper. If you are just looking to decrease sway, the Torklift StableLoad #TLA7200 is a…

view full answer...

TorkLift Tie Downs for 2018 Ram 2500 With No Running Boards

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching