How Is TorkLift SuperTruss Hitch Extension Length Measured

Question

Question:

Is the 32inch overall length or pin to pin?

asked by: Duane L

0

Expert Reply:

Hey Duane, welcome back! The TorkLift SuperTruss Hitch Extension # TLE1532 has an overall length of 32". This is measured from the end of the SuperHitch receiver to end of SuperTruss receiver.

What are you towing with your Silverado?

expert reply by: Robin H

0

TorkLift SuperTruss Hitch Extension
(click to enlarge)

Answer 1

Hi Steven; if you install the TorkLift SuperHitch Magnum #TLF1008-30 you will need different rear tie-downs for your F-450. The TorkLift Camper Tie-Downs #TLR3504 will replace what you have now. If you switch to a different aftermarket hitch you will…

view full answer...

Answer 2

Hello again Steven. The Camper Packer #TLA7010 is meant to support the camper under the main floor/frame structure, not out at the edges. You’ll use 2 stands, one toward the front and one toward the rear. We don’t have a specific placement for a…

view full answer...

Answer 3

Hi Charlie, There are a few options for TorkLift tie downs for your 2022 Ford F350 with a 6' 3/4" bed, that can work for you depending on what brand of trailer hitch receiver you're using. If you're planning on using your factory OEM…

view full answer...

Answer 4

Thanks for reaching out again, Kevin! You'll need to go with the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL27CR for your 2024 Ford F-350 (which requires the removal of the factory hitch receiver if present), and then for the extender…

view full answer...

Answer 5

I recommend replacing your hoses with the GasGear 90-Degree Propane Hose #GS47FR. Not only does this hose have a stainless steel braded hose which is less likely to stiffen and crack over time, the hose has a 90 degree fitting which relieves the hard…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

How Is TorkLift SuperTruss Hitch Extension Length Measured

Product Page this Question was Asked From

Continue Researching