Hitch for 2025 and 2026 Hyundai Ioniq 5

Question

Question:

Hello! I bought a hitch from you for my Hyundai ioniq 5, 2024. I am wondering if I can move this over to an ionic 5 2025 or 2026 or perhaps I would need a new hitch. Also, if I can move it, I might need a manual as I have misplaced the installation instructions. Thank you!

asked by: Paul C

0

Expert Reply:

Hi Paul, great question and I’m really glad you checked before trying to swap it over.

The hitches made for the 2024 Ioniq 5 do not fit the 2025 or 2026 models due to design changes on the newer vehicles, so your existing hitch will not transfer over. You would need a new hitch that is specifically designed for the updated model years. A solid option we have confirmed is the EcoHitch # EH72HR, which is designed to fit the 2025 and 2026 Ioniq 5, including the N and XRT trims, and gives you a clean install with the cross tube hidden behind the bumper.

I know it’s frustrating not being able to reuse your current hitch, but going with a confirmed fit will save you from installation issues and make sure everything lines up properly the first time.

What are you planning to use the hitch for on your Ioniq 5, bikes, a cargo carrier, or something else?

expert reply by: Heather A

0

Paul C.

3/18/2026

Thank you, Heather! Bikes. The hitch has worked great and has supported a bunch of fun adventures. Paul

Heather A.

3/18/2026

@PaulC You are welcome! Awe, I love that. It's a bummer you can't reuse it but I know the ecohitch will serve you well. Where do you like to ride?

Tom

3/19/2026

@PaulC Hey Paul, I installed one of their hitches on my 25 Ioniq-5. Only issue I had was popping the fender trim off, gotta push up. Also, when it comes to a wiring harness, if you want to connect trailer lights, purchase the wiring harness from a Hyundai dealer in Canada. They won't sell one for a 2025 in the US. The Hyundai wiring harness talks to the computer so it knows there is a trailer behind you and it disables the sensors that will otherwise slam on the brakes every time you back up because they think you are about to hit a wall.

Answer 1

Hi Jeff! I checked with EcoHitch and their Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH72HR will fit the 2025 Ioniq 5, Ioniq 5 N, and the Ioniq 5 XRT, so you are good to go! What will you be using the hitch for?

view full answer...

Answer 2

Hi Michael! I actually confirmed the fit if the EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2" #EH72HR with EcoHitch earlier this week for another person asking the same question. It will fit a 2025 Hyundai Ioniq 5, Ioniq 5…

view full answer...

Answer 3

The correct glass top for your Furrion FS21DB4A-SS is the Replacement Stainless Steel Top with Glass Cover for Furrion 2-in-1 Range Oven #C-FSRE21SA-SS-003. The only way to replace the glass cover is to replace the whole top.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 11

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Hitch for 2025 and 2026 Hyundai Ioniq 5

Product Page this Question was Asked From

Continue Researching