Does EcoHitch Front Hitch Fit 2024 Ford F-150 Tremor with Skid Plate

Question

Question:

Hello, will this front mount hitch work on a 2024 ford f150 Tremor addition? It has that large metal skid plate in the front. It has the 3.5 eco boost engine.

asked by: John

0

Expert Reply:

Hey John, the EcoHitch front hitch part # EH87SR can fit your 2024 Ford F-150 Tremor that has a skid plate but the skid plate would either need to be removed or trimmed to allow it to fit. This also fits the diesel models like you have as well. What would you like to use the front hitch for?

expert reply by: Jameson C

0

EcoHitch Front Hitch Installed
(click to enlarge)

John

3/4/2026

Will be used to move a pontoon trailer around

Jameson C.

3/4/2026

@John Nice!

Answer 1

The Inno crossbars part #IN436L are the exact same dimensions as the Malone bars so this would work on your Microsport trailer that has shorter bars to extend them out to 79 inches.

view full answer...

Answer 2

Hey Scott, thanks for reaching out. So it is possible to add a second tier to your Malone MicroSport LowBed with the #MPG474 2nd Tier Kit. It bolts right on and gives you another set of 50-inch crossbars. This should only be used for lighter kayaks…

view full answer...

Answer 3

Malone doesn't offer just the hardware for its Bunk Kit for Malone Trailers item #MPG561. You can only get the hardware if you order it with the bunks and straps.

view full answer...

Answer 4

The 2022 Hobie Mirage Outback weighs around 85 lbs and measures just under 13' long. The Malone MegaWing Fishing Kayak Carrier with Tie-Downs part #MPG207 has a 150 lb weight capacity with extra long straps so it will be the perfect choice. If…

view full answer...

Answer 5

For your Honda Pilot with Thule Aeroblade crossbars there's really only one kayak rack we carry that's going to have the capacity you need. The etrailer J-Style Kayak Carrier #e98878 that you referenced has a 100 lb capacity and fit Thule…

view full answer...

Answer 6

The etrailer J-Style Kayak Carrier part #e98878 will be a great solution! It has a really high capacity compared to the others at 150 lbs. It will also included everything that you need to tie it down. The straps for securing it to the rack, the bow…

view full answer...

Answer 7

Hey Erick, yes the EcoHitch front hitch part #EH39CR that you referenced does fit your 2026 Ford F-250 with the Tremor package.

view full answer...

Answer 8

The distance between the top crossbar of your Malone Trailer #MPG460XT and the bottom of the bars on the 2nd Tier Kit part #MPG474 is 32 inches. I confirmed this with Malone.

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Does EcoHitch Front Hitch Fit 2024 Ford F-150 Tremor with Skid Plate

Product Page this Question was Asked From

Continue Researching