To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily attach a variety of accessories to the front of your vehicle with this corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
California residents: click here
Instructions to cut facial are vague. So the hole in mine is way longer then necessary. Receiver tube is short, the hitch pin sets behind facial panel. This makes pinning anything into it a pain. See pics. I have installed similar hitches before, and they were perfect. Not real pleased with this.
The Installation went great and the Installation video was very helpful. I thought I could be clever and install the hitch by myself by using a floor jack to hold the hitch in place and attach the two bottom bolts first, but when I did that the top four bolt holes wouldn't align! So, I had to completely remove the hitch and have my son assist me in installing the hitch by FIRST installing the top four bolts as shown in the Installation video. Once the top four bolts were installed the bottom two were easy. I tend to be an OCD DIYer and am pleased how the cut out turned out in the front air dam. Enjoy the photos. I highly recommend this hitch for the Ford F-350 Super Duty trucks.
My order was processed quickly and I received the hitch in just a few days. Etrailer sent an email that contained a link to an installation video that made this project go quickly and smoothly. I am extremely happy with the service and products offered by Etrailer, I plan to be a long term customer!
Our front hitch arrived, and it had broken through the box and was scratched up. They were very nice and accommodating and taking care of us because of the damage to the hitch
Easy installation,and easy to order as well as free shipping. I'm definitely not mad about it! I did not follow the directions as far as the cutout. It is better to measure the square tube reciver so it looks cleaner.
Gwendolyn Y.
7/7/2025
Looks great, Robert! That's a pretty good tip to wait till the end to make the cutout.
The plow itself works great. The winch has a short strap which broke after the first time of using it. Because of the warranty, the winch was replaced. We've modified it with a longer, more resilient strap and have used it on three major snows now.
Great for our bike racks.
Box was pretty beaten up when I got it, all the parts were securely attached to the hitch so nothing was missing. The instructions called for an 18mm socket to remove and install bolts. The factory nuts were an 18mm, I chose to reinstall with the bolts and nuts that came with the hitch, those nuts are a 19mm no big deal just an extra trip to the tool box. Took me about 2 hours to install. Used my floor jack to hold the thing in place while I got the first couple bolts in, you need something or someone to hold the hitch in place while you get a bolt in each side.
Do not follow the instructions for cutting the air dam. I cut mine 3" wide and 3 1/2 " tall. It was still a little wide. It goes without saying "you can always enlarge it but can't make the hole smaller." The poor instructions kept me from giving it 5 stars. I was able to put black silicon around the cut. Other than that it went on fine and seems to be sturdy. I chose the curt because it was lower and a bicycle rack would not stick up as high,
12teachscience
8/7/2023
The front hitch is fine. I would like to emphasize do not follow the instructions on cutting the air dam!
Definitely a quality item, very satisfied with it. My truck is a 2X4 so has a smaller air foil below the bumper and it did not require cutting, there's a 1/32 to 1/16 inch gap between the two. I used some wood blocking to support it for the install and checked the paperwork and my measurements a few times thinking that I might have the wrong part because when the hitch was supported by the hardware there was about a 5/16 gap on both sides, had to draw that in by tightening each side alternately. All in all good. The hitch has the mounting holes needed for existing items that you will move to fit it in. Took me 4 hours to install including sizing the wood blocking that I used to support it. Also because I had to tighten each side a little at a time to close the gaps, tough work on the thick plate that is used to make the hitch. Extremely happy with the hitch including the access to the pin. Definitely glad I got it, definitely glad I got it here as well, on my porch in three days :)
I installed a large tool box for extra storage during an extended trip to Utah. The hitch was no problem and I minimized lateral movement by strapping the box frame to my tow hooks and it worked great. I will be installing a front motorcycle carrier in the future
As others mentioned, box was pretty beat up. But hitch was fine. I removed the air dam to give me more space. Hitch installed with the help from a floor jack to hold it in place. I cut the hole in the air dam and reinstalled it on the truck. Took about 3 hours, I added a Kuat drop receiver extension to lower and extended it to hold two Himiway e bikes
Kudos to E-Trailer for fast delivery. Due to the weight the box was beat up pretty bad, but no damage to the hitch. Quality hardware included as well as fish wires to get the hidden bolts into place. The measurements for cutting the slot in the air dam were wrong as far as I was concerned. The instructions said to cut 4 inches up and 3 1/2 inches wide. As you can see by the pictures, 4 inches up is too much. The top should be cut right where the curve at the top of the air dam cross feature is. I did install this by myself. A helper would have been a good idea. If you choose to install this solo, get the supplied bolts that hang down vertical started loosely first to carry the weight of the hitch. Then you can maneuver the hitch to line up the holes for the side bolts. Once everything is tight the hitch is very solid and except for my boo-boo with cutting the air dam, is almost invisible.
The front hitch fits well and was relatively easy to install. The one issue with it is you have crawl on the ground to install the pin for the hitch. The hole for the pin is behind the air dam. That makes it frustrating every time I use it.
Product arrived in a damaged box (handlers) but the sturdiness of the product and proactive taping of the hardware to the receiver prevented any parts from being lost.
Installation video was helpful. Instruction from manufacturer assume you know all terminology. Installation times shown are questionable. Two retired IT engineers completed the install in approx 3.5 hours. We decided to take off air dam to have better access to the bolts holding the fascias.
Getting a torque wrench on the "joined / reused bolts" was challenging as it is a one click on the ratchet.
Super pleased with the outcome and installation we accomplished. Going to use this to haul a pair of ebikes using a Swagman Ebike contraption. :-) Will mostly likely add a 4" drop adapter to lower the bikes out of the field of view while driving.
The customer service I received was great. I was in Nashville when my bike rack actually broke the welds on my fifth wheel bumper. I needed to purchase and install a front receiver for my F350. We were only staying in Nashville for 5 days so I needed the hitch shipped quickly. James R was my customer service rep. James had the hitch to me in one day. He also sent me a how to install video. The installation went well. I am 65 and was able to do the install with a little help from my floor jack.
Great experience
Nice quality product. Packaging pretty banged up but didn’t expect any damage given what it is. Kind of hard to damage steel.
No problems with installation. Two front bolts both sides a challenge to torque given limited swing on wrench.
Curt was pretty generous on trim dimensions on front air dam. I trimmed to their dimensions and have over an inch of clearance on top. Side to side is okay.
Overall quite happy with my purchase.
Carrying mountain bikes on 3 year cross country Airstream trip and this front mount system is great... no issues so far. Keep lubricated and periodically check threaded pin and life is good!
Working well after three years. Used for bikes.
fits and looks great!
Very well made. Great hardware. Straightforward installation.
Will be hanging 2 E bikes off a Superduty. Very pleased with product. And great fast shipping. Thanks.
Randy
9/12/2024
Still working out great after a year. No issues, hauls both E bikes with ease.
The hitch arrived in a few days and fit perfectly. Everything we needed was included. I would highly recommend the product and company.
David
6/14/2021
Perfect.
Item and the fasteners are the highest quality, no import junk.
The welds, deburring, and paint are also superior.
The fit is spot on, not snug, not loose, just perfect.
It went on a 2021 F250 Tremor and no trimming was needed for the front fascia.
It hangs down to about the front steering linkage level, a perfect clearance marker.
David
4/1/2022
Excellent ! Very Strong
Installed easily and is solid.
Fit perfectly and relatively easy to install. Only drawback is that it didn't come with a hitch receiver cover like my last one.
John K.
11/22/2022
Works perfectly. Very happy with it.
Do you have a question about this Front Receiver Hitch?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Lazer S.
4/14/2026
Glad the install went smoothly after getting some helping hands, Mark! What are you going to be using this hitch for?