Availability of Suspension Enhancement for 2023 Ram 2500 Rebel With Factory Air Suspension

Question

Question:

Hello. I have a 2023 Ram 2500 Rebel with factory air suspension / Alternate Trailer Height function. It also has a factory mounted anti sway bar. I have a bed camper that weighs 2100 lbs. I’m looking for a product that will help with sway while hauling the camper. I tried Timbrens, and they made contact with the truck unloading, rendering my Alt Trl Height function useless. I’m not sure if supplemental air bags would do the same. I would appreciate some help with finding a solution. Thanks. Cayton

asked by: Cayton M

0

Expert Reply:

Hi Cayton; the only thing you can do at this point is upgrade the factory sway bar. You can replace the rear with the Roadmaster Rear Anti-Sway Bar - 1-3/8" Diameter # RM94GR. The Roadmaster # RM47VR can replace the front. Other suspension enhancement options won't work because of the factory air suspension. Outside of that, I would look into upgraded shocks which aren't something that we carry.

expert reply by: Robin H

0

Roadmaster Rear Anti-Sway Bar
(click to enlarge)

Cayton M.

2/24/2026

If the Roadmaster Rear Anti-Sway Bar - 1-3/8" Diameter # RM94GR is an upgrade, would the Roadmaster Rear Anti-Sway Bar - 1-1/2" Diameter RM73FR be better since it’s a little bigger? Cayton

Robin H.

2/24/2026

@CaytonM the problem is the fitment. The # RM94GR is designed to replace the factory swaybar. The # RM73FR is designed for models that don't have the OEM bar.

Answer 1

Hey Robert welcome back! Given the suspension in the Ram truck's I do think you're going to see benefits by adding a set of air bags to your 2500. Not sure if you've gotten your new camper and taking it for a trip yet but I am guessing…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

Hi Cayton; the only thing you can do at this point is upgrade the factory sway bar. You can replace the rear with the Roadmaster Rear Anti-Sway Bar - 1-3/8" Diameter #RM94GR. The Roadmaster #RM47VR can replace the front. Other suspension…

view full answer...

Answer 9

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 10

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 11

To add an in bed 7-way to your 2023 Ram 2500 you will want the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness item #41157. This harness puts a 7-way connector in the bed of your truck and allows you to keep the one on your bumper.…

view full answer...

Answer 12

Hey Cayton! Are your motorized running boards cab length? Assuming they are, and you have the factory hitch, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL73NR will fit your 2023 Ram 2500 Rebel. You will also need turnbuckles like…

view full answer...

Availability of Suspension Enhancement for 2023 Ram 2500 Rebel With Factory Air Suspension

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching