Will EcoHitch Invisi Front Mount Trailer Hitch Fit 2019 Chevy Silverado 2500

Question

Question:

Will this work with a brush guard ?

asked by: Brian M

0

Expert Reply:

Hey Brian! It looks like you already ordered the # 306-X7906 and it was delivered. We don't have a way of knowing if it is compatible with your brush guard, especially without knowing which one you have. Since you already have the hitch, go ahead and pull out the instructions. You can use those to compare the mounting points and where the hitch will sit to the brush guard to see if they will interfere with each other.

What will you be using the hitch for?

expert reply by: Robin H

0

EcoHitch Invisi Front Mount Hitch
(click to enlarge)

Brian S.

2/20/2026

I haven’t bought a brush guard yet . I was wondering if there was any brand that etrailer would know that is compatible

Robin H.

2/20/2026

@BrianS we do not know of one specifically, no. I'm sure EcoHitch doesn't either but you could try asking them. Along the same lines, any you're interested in I would get a copy of the installation instructions and compare to where the hitch is installed. Most of the time they install in the same location but not always.

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will EcoHitch Invisi Front Mount Trailer Hitch Fit 2019 Chevy Silverado 2500

Product Page this Question was Asked From

Continue Researching