Which Pullrite Superglide for Ford Pucks to Tow Grand Design 3704BH

Question

Question:

Good Morning, Im about to buy a GD 3704BH that has a GVWR of 16,800. Would I need to get the 20K lbs PullRite SuperGlide 5th Wheel Hitch for the Ford Puck System? THnaks!

asked by: James B

0

Expert Reply:

Hey James, yes the Pullrite Superglide part # PUL73RR that you referenced would be a great choice to tow your Grand Design 3704BH. It has a little more capacity than you would need but that doesn't negatively affect anything. Let me know if you have any other questions below!

expert reply by: Jameson C

0

Answer 1

Hey Kyle. Unless you're driving around with 1,500 lbs of gear in the bed of your 2025 Ford F-250, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs item #AL29DQ are not going to be overloaded. Your 5th wheel hitch and a full tank of fuel…

view full answer...

Answer 2

Hey Barb. To use the 24K PullRite SuperGlide 5th Wheel Hitch item #PUL88RR with the puck system in your 2026 Ford F-350, you'll need the Adapter Rails for 5th Wheel Hitch item #C88KR. The item #PUL55RR puck system brackets won't fit the 24K…

view full answer...

Answer 3

Hey Paul! The PullRite SuperGlide #PUL43RR (2714) and #PUL73RR (2914) do weigh the same. The main difference is the capacity, which is going to come from the base of the 5th wheel hitch. Since your 2027 Keystone Cougar 316RLS has a GVWR of 12,900 lbs…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 6

Kyle, thanks for providing the Dexter hub number. Unfortunately, the Dexter 8-147 hub and drum assembly has been discontinued for quite some time, and there isn't a direct replacement hub available today that matches those spindle dimensions…

view full answer...

Answer 7

Hey Karl, thanks for reaching out. Yes, the PullRite SuperGlide Quick Connect Capture Plate #PUL96RR does come with the basic hardware you need to install it. The 331704 Quick Connect Capture Plate is designed to slip over your king pin box and be…

view full answer...

Answer 8

Hey Kory, the Pullrite Super Glide hitch part #PUL88RR that you referenced is just the fifth wheel hitch and does not come with any hardware or rails to install in the bed of a truck. This is designed to fit the industry standard above bed rails so…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 11

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Which Pullrite Superglide for Ford Pucks to Tow Grand Design 3704BH

Product Page this Question was Asked From

Continue Researching