Do etrailer Electric Trailer Brakes Include Hardware

Question

Question:

Are the fine threaded nuts for mounting the assembly to the axle included in the kit?

asked by: Brett B

0

Expert Reply:

Hey Brett! The etrailer Electric Trailer Brakes # AKEBRK-7-SA do not include brake mounting hardware. If you need it, the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12 is available separately.

What trailer are you working on?

expert reply by: Robin H

0

etrailer Electric Trailer Brakes
(click to enlarge)

Answer 1

Hi Craig! What you are looking for is the etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K #AKEBRK-7-SA. As you are needing 2 rights and 2 lefts, you will need to get two sets of the #AKEBRK-7-SA, but it is…

view full answer...

Answer 2

Hey Kenneth, thanks for reaching out. Yep, it is! The Dexter bearing Kit #DX58ER is exactly what you need for the 7K axles on your 2022 Alliance Paradigm 340RL. That gets you both bearings, matching races, your seal, tang washer and cotter pin. You…

view full answer...

Answer 3

Hey Tom, we have the correct hub/drum you are looking for with the part #42866UC3-EZ if you have 1/2 inch wheel studs or the part #8-219-13UC3 for if you have 9/16 inch diameter studs. Then for brake assemblies you'd just need the part…

view full answer...

Answer 4

Hi Kenneth! Since your 2023 Brinkley Z 3100 5th wheel has 7k axles, I recommend grabbing the Terran Axle Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 6-7K #TX77ZJ. These are priced very well, fit the standard 5 bolt pattern…

view full answer...

Answer 5

Based on the photo and information you provided, I can tell you have 12 x 2 inch Dexter brake assemblies for 5.2K axles, for which the Electric Trailer Brake Kit #AKEBRK-7-SA will be an excellent replacement. These are self-adjusting brakes so they…

view full answer...

Answer 6

The reason your trailer is heavily leaning to one side is because of the way it's loaded. From the picture, it appears that you have much more equipment on the right side than you do the left side. This uneven loading has caused the leaf spring…

view full answer...

Answer 7

No, they are not but they are the same size, same capacity, and both fit a 5 bolt mounting flange. The Dexter Nev-R-Adjust Electric Trailer Brakes item #23-464-465 have a thicker and more durable brake padding material than the etrailer Electric…

view full answer...

Answer 8

For replacement 12" electric brakes I recommend the Electric Trailer Brake Kit #AKEBRK-6 and the Mounting Bolts and Hardware #BRKH12. This gives you the brakes and hardware for 1 axle so you'll want to multiply that enough for however many…

view full answer...

Answer 9

The etrailer.com Electric Trailer Brake Kit #AKEBRK-7-SA and the Dexter Nev-R-Adjust Electric Brake Kit # 23-464-465 referenced in your question are both self-adjusting assemblies that will work to replace the existing Dexter brakes on your 7,000…

view full answer...

Answer 10

When measuring the brake drum, you measure the interior diameter on the drum. I have attached a photo to help during the measuring process. If your brakes are 7 inches part #AKEBRK-2 works for your application. You also need hardware part #BRKH7 If…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Do etrailer Electric Trailer Brakes Include Hardware

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching