Self Adjusting 12" Brakes for a 5,200 to 7,000 Pound Axle
Updated 04/28/2026 | Published 04/20/2026
Products Featured in This Question
Question:
Looking for trailer brake kit 2 right 2 left self adjusting for 12 inch drum 2 inch pad. 5200 to 7000 pound axle
asked by: Craig F
Expert Reply:
Hi Craig!
What you are looking for is the etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K # AKEBRK-7-SA. As you are needing 2 rights and 2 lefts, you will need to get two sets of the # AKEBRK-7-SA, but it is self adjusting and works for 5,200 to 7,00 pound axles (12" x 2").
I do have to say these do not include mounting hardware though, so if your hardware is looking a little worse for wear, you will want to replace it. We that is the Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12, but again, you will need to get two sets of this as it will only cover one axle.
What kind of trailer are you needing these for?
(click to enlarge)
Scott M.
4/25/2026
I purchased the dual wheel kit from Etrailer. It went on perfectly and wirks as it should.
Lazer S.
4/27/2026
Lazer S.
4/28/2026
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: trailer bearings races seals caps
- Search Results: trailer brakes
- Search Results: trailer hubs and drums
- Q&A: Do etrailer Electric Trailer Brakes Include Hardware
- Q&A: Will The Dexter Bearing Kit DX58ER Fit A 2022 Alliance Paradigm 340RL With 7,000 lb Dexter Axles?
- Q&A: Replacement Hub/Drum and Brake Assemblies for 6k Hub with 8 Lug Bolt Pattern
- Q&A: Replacement Electric Brakes for Dexter PR-FF SEC-FF 5.2KPR-GGSEC-GG 12X2XQ 36-89
- Q&A: Comparing Dexter and etrailer.com 7,000 Pound Electric Brake Assemblies
- Q&A: How to Fix a Trailer Leaning Heavily to One Side
- Q&A: How do I Correctly Measure Drum Brakes?
- Shop: Terran Industries Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 6-7K
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Shop: Mounting Bolts and Hardware for 12" Brake Assemblies
- Shop: Dexter Bearing Kit for 7K Axles - Bearings 14125A/25580, Races 14276/25520, Seal 10-36
- Shop: Dexter Trailer Hub & Drum for 5,200- to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs - Pre-Greased
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Shop: Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K - 10 Pairs
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Measuring To Choose The Right Trailer Axle
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Drum - AKHD-545-35-EZ-K
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
on Trailer Brakes
Ron M.
4/25/2026
I could use my old mounting bolts so that was not an issue. Putting them on was not hard but getting the self adjusting brakes initial setting proved challenging. I found it very difficult to adjust through the slot and ended up making an adjustment with the drum off and then putting it on to get the correct amount of drag. It was trial and error but it worked. The self adjusting mechanism makes it difficult to adjust them through the slot. I am sure that someone doing it all the time can do it successfully but I never mastered the trick.