Will WDH With 2-1/2" Shank Fit MORryde EzStor Lite

Question

Question:

MORryde EzStor Lite - Removable Storage Bracket for Weight Distribution Hitches Part Number: MR72ZV Will this work with my weight safe hitch with a 2.5 inch shank?

asked by: Jody W

0

Expert Reply:

Hi Jody; I'm sorry to say the MORryde EzStor Lite # MR72ZV is only able to accommodate a 2" shank at this time. MORryde does not have an option right now for a 2-1/2" shank and we don't have any other storage solutions like this that would work.

expert reply by: Robin H

0

MORryde EzStor Lite
(click to enlarge)

Jody W.

1/28/2026

Really appreciate your help Robin. I will keep a lookout for when you get your people to make one that accommodates a 2 1/2" shank.

Answer 1

Hey Jody, The MORryde EzStor Storage Bracket #MR72ZV only fits 2" shanks. I hope MORryde comes out with a 2-1/2" version at some point. We do have wall-mount options like #C64RV that work well for garage storage. If you’re looking for…

view full answer...

Answer 2

Hello again Rob; the distance between the mounting holes on the Curt Wall Mount for 2-1/2" Hitch Accessories #C64RV is 4-3/4". What will you be using the mount for?

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Thanks for letting us help Steven. Based on the measurements you provided, I agree that your original leaf springs were most likely 25-1/4" long. That would make the 4-Leaf Double-Eye Spring for 4,400-lb Trailer Axles - 25-1/4" Long #DX95CR…

view full answer...

Answer 8

Hey Cody, the thermostat of the Furrion Chill Cube part #FR27TQ is supposed to work with furnaces but it's not doing so as reliably as we'd like. It will run the heat pump that comes with this kit though. If you have a current thermostat…

view full answer...

Answer 9

Hey Cindy, I can help you out with all this! I'll start by saying the Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump - Ducted - 18K Btu #FR27TQ would be the one to look at since it includes the AC unit, distribution box for…

view full answer...

Answer 10

Hey Gino, I totally get what you’re trying to do there. Having that 12 volt outlet way across the cab can make things feel messy fast, especially when you’re trying to keep a clean setup and good visibility. The Voyager WiSight 2.0 monitor part…

view full answer...

Answer 11

Hey Phil! For a tandem axle trailer you will want two of the Leveling Kit with Wheel Chocks for Trailers and RVs #WS28ER. You are correct, one under each tire is best. I use these on my Jayco with one under each tire to keep them off the ground and…

view full answer...

Answer 12

I have linked the instructions for the Tekonsha Primus IQ Trailer Brake Controller #TK90160 near the bottom of this page. You can download them and either save them to your phone or print a hard copy for yourself.

view full answer...

Will WDH With 2-1/2" Shank Fit MORryde EzStor Lite

Product Page this Question was Asked From

Continue Researching