Will TorkLift Tie Downs Fit 2023 Ram 2500 Rebel With Motorized Running Boards

Question

Question:

I have 2023 Ram 2500 Rebel with a 6 1/2 ft bed. Will these tie downs work with the motorized running boards?

asked by: Cayton

0

Expert Reply:

Hey Cayton! Are your motorized running boards cab length? Assuming they are, and you have the factory hitch, the TorkLift Tie Downs - Custom Frame Mount - Front and Rear # TL73NR will fit your 2023 Ram 2500 Rebel. You will also need turnbuckles like the TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9529-2-LK.

What kind of camper do you have?

expert reply by: Robin H

0

TorkLift Tie Downs
(click to enlarge)

Robin H.

1/27/2026

Hey Cayton, how did the TorkLift tie downs and FastGun turnbuckles work out on your Ram 2500 Rebel with the motorized running boards? Your update could make it easier for others setting up a similar truck and camper combo.

Cayton

1/27/2026

@RobinH. I ended up getting just the front Torklift anchors. I installed them last night, and the motorized running boards clear them. I think they will work out great.

Robin H.

1/27/2026

@Cayton glad to hear it!

Answer 1

Hey Gary, yes we have Torklift camper tie downs that fit your 2025 Ram 2500 short bed with the part #TL73NR. What kind of camper do you have?

view full answer...

Answer 2

Hey Jeff, The only bed-mounted camper tie-downs we currently offer for your 2020 GMC Sierra 2500 would be the Brophy Slide In Camper Tie-Downs #HSAB. These drop into the stake pockets and use "T-bolts" to press against the inside of the…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

Hi Clint, welcome back The HappiJac Original Turnbuckles for Camper Tie-Downs - Stainless Steel - Qty 4 #LC182898 are likely what you are looking for and will be a good in between option (they are actually pretty nice and should last a good long…

view full answer...

Answer 11

Hey Chris congrats on the new truck! I did some research and the HappiJac Camper Tie-Downs item #LC236326-205221 is exactly what you need for your 2026 Ram 2500. I'm working on getting our website updated as we speak. This kit includes both front…

view full answer...

Answer 12

Hey Debbie, I have a solution for you but the sliders are all going to be heavy due to them having to support the additional movement. Since your Ram has the factory puck system, I recommend the Reese 5th Wheel Hitch w/ Square Tube Slider item…

view full answer...

Will TorkLift Tie Downs Fit 2023 Ram 2500 Rebel With Motorized Running Boards

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching