Will The Pullrite Adapters PUL55RR Work On My New 2026 Ford F350?

Question

Question:

HI - I have an older Pulrite 2700 with the ISR feet on it and have just upgraded my truck to a 2026 F350 with the OEM puck system. Will this work to convert my existing 2700 pulrite hitch to work with my new truck? If it has not been tested I will gladly test it as long as I can return it if it does not work.

asked by: Ray D

0

Expert Reply:

Hey Ray,

Yes! The adapter rails # PUL55RR are both confirmed to fit your new 2026 Ford F350 with the OEM system, as well as your older 2700 Pullrite hitch. It would simply drop into the puck system and then you would hook up your Pullrite like normal.

What are you towing with that hitch?

expert reply by: Nick S

0

Ray D.

1/6/2026

We have a Jayco Eagle 321RSTS Which we were towing with our F250 and the pulrite hitch on ISR rails.

Reply

Nick S.

1/6/2026

@RayD Solid! Those adapters should get you all set to get back out on the road.

Reply

Answer 1

Hello Edwin, Just as long as your Ford F-150 is a 2010-2019 the Adapter Rails for PullRite SuperGlide 5th Wheel Hitch - Ford Towing Prep Package #PUL55RR will convert it to your puck system. We had a customer confirm that it worked for his 2024 F-350…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 6

No, they will not Mark. The Replacement Legs item #RP63FR only work with the Reese M5 hitches like the item #RP30928 for example. The only way to mount the Reese 5th Wheel Trailer Hitch item #RP30047 in the puck system of a 2025 Silverado is to use…

view full answer...

Answer 7

Hi Cody; the #LC328484 is a Trailair Flex Air with a Lippert 0719 bolt pattern. Assuming that is what you have, the correct Sidewinder is the Reese Sidewinder 5th Wheel King Pin with Rotating Turret #RP34FR. What 2022 Ram model do you have? Do you…

view full answer...

Answer 8

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 9

Hi Jeremy! You can definitely adapt your 16K PullRite SuperGlide 5th Wheel Hitch for Short Bed Trucks #PUL93RR to fit your new 2025 Ford F-350. What you will need is actually what you asked this question from, the Adapter Rails for PullRite…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Answer 12

Good question Mel, and I don't blame you for being confused since there are a lot of options and there is probably more than one right answer. The correct pivot arm position will depend on the clearance between the nose of the camper and the cab…

view full answer...

Will The Pullrite Adapters PUL55RR Work On My New 2026 Ford F350?

Product Page this Question was Asked From

Continue Researching