What Front Hitch will Fit My 2026 Ford F-350 Super Duty with Dual Rear Wheels?

Updated 02/19/2026 | Published 02/12/2026

Products Featured in This Question

EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2"

(6)

$390.67

Question:

I am trying to find a 2 in front hitch that will fit a 2026 ford f350 deisil engine dual wheels. The new 2026 has radiator brackets on the inside of the frame, where you use to bolt the hitch .

asked by: David C

Expert Reply:

Hello David,

Thanks so much for reaching out!

For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" # EH54QR. This is the only front mount option we offer that is confirmed to fit the dually models.

I completely understand your concern about the updated radiator brackets and potential interference. This hitch is designed to use the factory frame mounting locations, and we do have a confirmed installation on an F-350 without any reported issues involving cooling components. There is no cutting or modification required to the radiator or related parts during installation.

The only Tech Tips we have are: Tech Tip: Product not intended for models with auxiliary cooler. Product fits DRW models only.

I want to be certain this bolts up cleanly for you. Can you confirm whether your truck has a factory auxiliary cooler mounted in front of the radiator?

I’ve attached a customer review from the product page so you can see a real-world install experience.

What are you planning to use the front receiver for first? Maneuvering a trailer into tight spots, carrying bikes or a cargo rack, or setting up a winch?

expert reply by: Kate F

Review on F-350
(click to enlarge)

Tom D.

2/18/2026

2022 F-350 Dually, draw-tire 65076 worked for me…removed bumper / w air dam in one shot , remove a couple bolts on oil cooler , pretty easy , not sure if they changed anything with the 2026 ? I originally ordered a Curt hitch ,didn’t work ,didn’t realize it wouldn’t work with the oil cooler

Flyboats

2/18/2026

I put a similar one on my '22 F 350 HD, single wheel. It fit my truck fine and was pretty easy to install. I put it on so I could carry the spare tire on the front. The carrier I had needed to be raised or lengthened about 9" to get above the active cruise control sensors on the front of the truck. That did the trick.

Ernest T.

2/18/2026

David, I installed this hitch on my 2020 f-350 DRW gas engine (7.3) and was disappointed that the hitch when installed had a 5 degree pitch to it that could not be corrected. I was surprised that tork lift dropped the ball on this hitch. I have several accessories from them and all fit like a glove. I have a 2021 model of the same truck now and used a draw title hitch that worked very well. I do recall that some extra work was involved with the diesel due to an oil cooler or after cooler but the videos showed the draw title would work.

Kate F.

2/18/2026

@ErnestT I am shocked to hear about the 5 degree pitch on yours Ernest. By any chance did you reach out to Torklift about it? Just curious to what they had to say, if you didn't, I am going to.

Edward

2/19/2026

My dually is a 2023, I had a off road company install, $200, they had to remove the front bumper. I would recommend you call a local off road business and ask them if they have done it before, they may have a work around.

Kate F.

2/19/2026

@Edward Great pointer Edward. David, I attached our dealer locator if you would rather pay someone to do the job, or if you are close to Wentzville, MO we can do it for you for free =)

Helpful Links

installer/near-me