Can I Convert My PullRite SuperGlide For GM OEM Prep Package to a Ford OEM Prep Package?

Question

Question:

Can the 2915 with GM puck system be converted to a 2914 that would fit a Ford?

asked by: Edwin F

0

Expert Reply:

Hello Edwin,

Just as long as your Ford F-150 is a 2010-2019 the Adapter Rails for PullRite SuperGlide 5th Wheel Hitch - Ford Towing Prep Package # PUL55RR will convert it to your puck system. We had a customer confirm that it worked for his 2024 F-350 as well.

Did you buy the 2915 by mistake, or get a new truck?

expert reply by: Kate F

0

Edwin F.

8/15/2025

I saw in the Pullrite website that part # 4448 side rails, which you have listed as "Adapter Rails for PullRite SuperGlide 5th Wheel Hitch - Ford Towing Prep Package Part Number: PUL55RR" that will convert the 18K and 20K Superglide to a Ford puck system for years 2010-2019.

Kate F.

8/18/2025

@EdwinF Good catch Edwin, still kind of newish so I overlooked it, my apologies. Yes, the # PUL55RR it is listed to fit 2010-2019, but we have a customer that confirmed it worked on his 2024 as well. I am going to revise my original answer.

Answer 1

Hey Ray, Yes! The adapter rails #PUL55RR are both confirmed to fit your new 2026 Ford F350 with the OEM system, as well as your older 2700 PullRite hitch. It would simply drop into the puck system and then you would hook up your PullRite like normal.…

view full answer...

Answer 2

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Answer 8

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 9

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 10

Hey John, thanks for the picture of your truck bed! To install a set of 5th wheel rails in your 2022 Ram 2500, I recommend the B&W Custom Installation Kit w/ Base Rails item #BWRVK2602. This set of rails are industry standard so they'll work…

view full answer...

Answer 11

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 12

Since we don't carry the PullRite line I can't really speak to their quality but from what I can see from there website their 2900 model is fairly similar to the Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV. Both hitches offer 14"…

view full answer...

Can I Convert My PullRite SuperGlide For GM OEM Prep Package to a Ford OEM Prep Package?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching