Will Quick-Release Rooftop Tent Mounting Kit Fit Yakima Crossbars

Question

Question:

Will the baseplates mount to Yakima Timberline FX crossbars?

asked by: Dr. J

0

Expert Reply:

Hi Dr. J; I'm sorry to say the Quick-Release Rooftop Tent Mounting Kit # FR89RV only fits the Front Runner crossbars and platforms. They use a different channel so their accessories are not compatible with standard crossbar T-slots.

expert reply by: Robin H

0

Quick-Release Fitment
(click to enlarge)

Dr. J.

12/17/2025

Can you recommend a roof top tent quick release compatible with Yakima Timberline FX ?

Robin H.

12/18/2025

@DrJ this is the only quick-release we really have like this. I am not aware of a universal quick-release that would fit any tent and work with standard aero bars but there may be options out there. Anything else would be specific to the tent and probably come with it.

Answer 1

Hey Phillip, just the base section of the Quick-Release Rooftop Tent Mounting Kit for Front Runner Platform Racks #FR89RV that you referenced is 2 inches. How much clearance do you have?

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 9

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Will Quick-Release Rooftop Tent Mounting Kit Fit Yakima Crossbars

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching