Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace lost or damaged T-bolts on your Yakima Rack and Roll trailer. Kit includes 4 bolts and nuts.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com, and today we're gonna take a brief look at these Yakima Replacement T-Bolts. Now these are going to replace the lost or damaged T-Bolts on your Yakima Rack and Roll trailers. And as you can see, this includes the T-Bolt, the washer, and the nut, and you are going to receive four of these. And on your screen I am including the measurements of the bolt itself in case you need that information. I took a look at some of the Q&As on our product page and I noticed that quite a few of our neighbors were asking about the measurements of the bolts, so this diagram is also in the Q&A section of our product page if you need to refer to it again.
But these bolts are the direct replacement from Yakima, so you can have the confidence that these are going to work just like the originals that you are looking to replace. Whether you lost one or two or more, or one of them, or a couple of them became damaged for whatever reason, these are going to be exactly what you need for your Rack and Roll trailer. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
Used the t-bolts for a modified project on my rooftop platform. Now the storage box is fully secured. It works perfectly!
I had to replace my old trac rack fasteners for my kayak carrier with these for my new trac rack. The worked fine.
If you have Yakima or Rhino Rack crossbars and you want to bolt something to them, this is the kit for you! Speedy shipping as always with etrailer!
I was looking T-bolts to mount awning brackets to my rooftop Yakima HD bars, and these were exactly what I needed. The hardware is stout and secure, perfect for the job. eTrailer was the only place I could even find these, the manufacturer didn’t even have them available.
The folks at eTrailer were fast, my order was packaged and shipped out next day, the tracking and status page had every step along the way. Overall great experience!
I have a Yakima HD rack and these blots are way too big
I'm grateful to etrailer for helping me find the T-Bolts I needed for my Roll n Lock Tanneau Cover. The staff was able to quickly identify the right T-Bolts for my application, and they were happy to answer all my questions. The T-Bolts fit perfectly and I'm confident that they will hold up for a long time. I would recommend etrailer to anyone looking for T-Bolts or other auto parts.
Worked perfectly to install my 6 foot long ARB awning onto my Yakima Jetstream cross bars. Drilled out the ARB brackets to 10mm to fit these T-bolts. Very heavy duty and excellent quality hardware.
These are substantial T bolts. I used them to attach the brackets for an ARB Touring Awning to my Yakima Jet Stream racks. I had to drill out the brackets to accommodate the Yakima bolts.
These fit factory rack tracks on leer topper. Yakima?? Anyway fit perfectly for my application. My $50 homemade kayak/canoe carrier. Used super strut from big box store.
I have bought many items from this site. They have always been delivered on time and as ordered. I wouldnt hesitate to recommend etrailer to friends and family. I used them to create a deck on my yakima trailer by counter sinking the bolt.
Overall great service and good communication with the customers
These T-bolts from Yakima work great. I used them to install handles on the bottom side of my Yakima HD bars (mounted on my truck shell). They have made getting up to the rack to load and unload much easier.
These are some heavy duety bolts they fit perfectly with THULE PRO BARS. I definitely recommend these instead of other [online store] options I've tried.
These don’t fit in Yakima tracks. The base plate is too thick.
Jenny N.
2/5/2024
I want to help to make sure that you have the hardware that you need. Are you using these t bolts with your Yakima Rack and Roll trailer?
Perfect fit with Yakima roof tracks on ARE camper shell for Toyota Tacoma. Probably for any roof track. The bolts/ nuts/ and washers are 10mm. High quality and exactly what I needed for my DIY roof rack.
Payton 
6/10/2022
Perfect- no problems after a year!
worked perfectly!
They were exactly what I needed and have held up well. I check them about once a month, I haven't needed to retighten or adjust anything. Would recommend them to anyone doing similar work...
I used these to mount a bike rack for our tandem bike onto our Thule Aerobars. They slide into the Aerobars without any trouble, and they seem to be very sturdy. One note is that the bolt size is not 3/8". It is 10mm.
Michael
5/31/2020
Ive had as many problems with this product over the last year as I wanted... ZERO!
Good quality hardware
Big & sturdy, used them to mount an old cargo box to the top of the Yakima Aero bars on my new car
Exactly what I needed to replace some aging T-bolts on our Yakima Rack N Roll Trailer. No one else seemed to have these when I needed them (not even Yakima), and the wait was long due to supply issues out of eTrailer's control; however their customer service staff periodically provided updates on their availability, and eventually they came in. Thanks eTrailer!
Replacement parts, easy to put on, they work as intended and should last for a very long time.
Perfect replacement for my Yakima Rack and Roll Trailer.
One thing that is important to note.
They are either the real part or made to Yakima OEM standards.
Why is this important?
I’ve never received cheap imitations or counterfeit parts from etrailer. But with the giant internet only retailer that also has a steaming service snd rents out its cloud, I’ve been ripped off by organizations in that supply chain that use manufacturer’s pictures and write ups to move shoddy substandard goods.
Given the safety risks of hauling any roof rack or trailer down the highway, etrailer and their supply chain ethics and authenticity gives me piece of mind
This was perfect for what I was trying to do thank you!!
I purchased these T-bolts and nuts to fit the roof rails/mounting rails of a Yakima roof rack. As soon as they arrived I got up on the ladder to check the fit and it is perfect. These will be used to mount solar panels on the roof of my truck cap to charge my RV batteries while I am driving. And like usual for me I purchased extra sets...because while 2 isn't enough, what if I want to add something else to the roof rails....
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Johnny
7/27/2025
Worked great for Burning Man, where the solar panels are stored and other camping accessories, and a cross-country tour back east on Route 50s loneliest road in America, and a camp night at Skinwalker Ranch to watch meteors and UAPs fly around for an hour. The Yakima platform and t-bolts did their job!