Access Rockstar Mud Flaps for 2024 Ford F-350 Dually

Question

Question:

Do it fit 2024 f350 dually, is it wide enough or is there extenders to widen it

asked by: Archie C

0

Expert Reply:

Hey Archie! For your 2024 Ford F-350 Dually you need the Access Rockstar Commercial Grade Mud Flap - Full Width # A48VA. These are specifically designed for dually trucks like yours so extenders aren't necessary. If you want to add mirrored trim plates # A22NG they are available separately.

expert reply by: Robin H

0

Access Rockstar Commercial Grade Mud Flap
(click to enlarge)

Answer 1

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

Hi Bill! Thanks for your pictures, they were extremely helpful! ^___^ The LCI Part #194170 on that tag you found means you have a 1621 pin box. The Gen-Y #GY45SR you were looking at is specifically for the Lippert 1116 and 1716 pin boxes, so you will…

view full answer...

Answer 7

Hi Hilario, congrats on the new truck! ^___^ If this were my truck and I was installing a retractable cover on it (which I actually did with my Silverado), I would go with the manual RetraxPRO XR Hard Tonneau Cover - Retractable - Aluminum - Matte…

view full answer...

Answer 8

Hey Brian! It looks like you decided to go with the MORryde GooseTech #MR27MV, which is a great option. However, the GVWR of your 2023 Keystone Montana 3231CK is 16,680 lbs and this is designed for 18k+. Also, did you verify that your pin box bolt…

view full answer...

Answer 9

Hello David, Thanks so much for reaching out! For your 2026 Ford F-350 diesel dually, you will want the EcoHitch Hidden Front Mount Trailer Hitch Receiver - Custom Fit - 2" #EH54QR. This is the only front mount option we offer that is confirmed…

view full answer...

Answer 10

Hello Matt, I was seeing some mixed information on this as well, so I reached out directly to my contact at Firestone to confirm. The Firestone Ride-Rite Air Bags w/ Easy Mount Compressor - Wireless Control - Single Path - 5,000 lbs #F44XV will fit…

view full answer...

Answer 11

Hey Greg, yes we have confirmed with Firestone that the part #F95FV that you referenced is a confirmed fit for your 2026 Ford F-350 long bed dually. These also will not require you to remove your overload springs either. Are you wanting a compressor…

view full answer...

Answer 12

Hello Gary, Thanks for writing in! I'm glad you found us. I'm especially glad you asked about TorkLift tie-downs. If you're hauling a truck camper, they're my favorite option because they're built specifically for the truck and…

view full answer...

Access Rockstar Mud Flaps for 2024 Ford F-350 Dually

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching