Everything Needed for 2019 Ford Ranger

Question

Question:

Can you give me a list of everything I need for my 2019 Ford Ranger.

asked by: Mike D

0

Expert Reply:

Hi Mike, what exactly are you looking for? You looked at a weight distribution hitch (WDH), are you trying to find the right one for your setup? If you are, can you tell me more about your trailer? To find the right WDH it is important to know the tongue weight of your setup. For example, the Curt TruTrack 2P Weight Distribution System # C69JR you looked at is designed for 800 lbs - 1,000 lbs of tongue weight.

If you can add this information in the comments below I can see what the best option would be for your trailer. If you're looking for something else entirely let me know.

expert reply by: Robin H

0

Curt TruTrack 2P
(click to enlarge)

Mike D.

11/30/2025

Yes I’m looking for a WDH for my 2026 Grand Design Aim 15RBA to use with my 2019 Ford Ranger. The tongue weight is 392lbs dry. The GVWR is 4,795lbs. I need the right shank too. Thank you Mike

Robin H.

11/30/2025

@MikeD if you want a roundbar system I recommend the Fastway e2 # FA94-00-0600. I don't know the rise/drop you need without you measuring but this has a max rise of 5-3/4" and max drop of 3-1/2". I attached a help article below which explains how to measure. I'm assuming that has a 2-5/16" coupler so you will need the Curt # C40030 along with the # ALL643216 for hitch ball installation. If you want something that is a step up from the Fastway you can also use the Equal-i-zer # EQ37060ET. Equal-i-zer is considered to be the best by many (they also make Fastway). This has 4-point sway control instead of 2-point and uses trunnion bars for better clearance. This shank has a max rise of 7" and max drop of 3". It comes with a ball but the # ALL643216 is still required for hitch ball installation.

Helpful Links

faq-ballmount.aspx

Mike

11/30/2025

@RobinH That sounds almost borderline to small. Do you carry Blue Ox BXW0650?

Robin H.

11/30/2025

@Mike the weight rating or the shank rise/drop? We do have the Blue Ox # BLU36FR which is rated the same. If you're loading your trailer to the max, high on tongue weight, and put a bunch of stuff behind your rear axle then these probably are underrated a bit. If you like Blue Ox and want a higher rating the SwayPro # BXW0750 will cover you with a tongue weight range of 550 lbs - 750 lbs. The Weigh Safe # WS79VR is another good option and it lets you dial it in with the scale and adjuster so it is perfectly set every time.

Robin H.

11/30/2025

@Mike sure I understand, this isn't a simple subject one way or another, lots of variables in here depending on what you're carrying and how much you plan on towing. In my opinion the best option would be the last system I mentioned, the Weigh Safe True Tow # WS79VR. This has a scale and pairs with their app so you get it set perfectly no matter what. It is super easy to adjust so you're right where you need to be headed out with the trailer fully loaded, and when you're heading back a bit lighter. The scale also helps you make sure everything is properly loaded in the trailer since your tongue weight should be sitting at 10-15% of the loaded trailer weight. Most of the time it ends up at around 11-12% unless you're loading tons of gear in the front or back. I attached a video below where Brad covers the system in detail, I would check that out.

Helpful Links

tv-review-weigh-safe-true-tow-weight-distribution-hitch-ws79vr.aspx

See All (5) Replies to Mike D. ∨

Answer 1

Hey David, the Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR that you referenced will fit any vehicle that has a 7-way installed on it including your 2017 Ram 3500 that has a factory brake controller. This will bypass that circuit on your…

view full answer...

Answer 2

I recommend using the Fastway e2 Weight Distribution #FA92-00-1000 for your trailer with the 2 UTV's. This system is also rated for a trailer up to 10,000lbs but has a much wider spread tongue weight capacity of 600-1,000lbs. The Curt #C69JR you…

view full answer...

Answer 3

The Fastway weight distribution system you have part #FA92-00-1000 can do a drop of up to 1 inch, so for a shank that works with this system and can do a drop of up to 5-1/2 inches of drop you'd want the part #FA92-02-4214.

view full answer...

Answer 4

Hey Ryan, welcome back! A brake controller will cover anything with brakes and then you will also need a ball mount. The #C57DR you were looking at will work, but you don't really need all of that. The sway bar would be a permanent addition to a…

view full answer...

Answer 5

Hey John, thanks for reaching out! If your Prowler has a GVWR of 5,200 lbs then most jacks will work great with it. I recommend picking up an electric jack to make setup and tear down quicker and easier. Here are my 2 picks depending on how…

view full answer...

Answer 6

Hey Sherill, there isn't a swivel foot available for the etrailer electric jack part #e23ZV because you really shouldn't be parking on terrain uneven enough or unlevel enough for that to be an issue as the trailer could roll away. Generally…

view full answer...

Answer 7

Hey Tris. I attached a diagram below that will show you the dimensions of the etrailer Manual Sidewind Trailer Jack w/ Drill Adapter item #e88GV. From the mounting plate to the bottom of the jack foot is 9-1/8". The etrailer Manual Sidewind…

view full answer...

Everything Needed for 2019 Ford Ranger

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching