Front and Rear Frame Tie Downs for 2023 Ram 3500 Camper Shell

Question

Question:

Which front and rear frame mount tie downs will fit my 2023 RAM 3500 Laramie dually 8foot bed. I have tube style running boards that extend to the rear of the crew cab. Thank you

asked by: Bob M

0

Expert Reply:

Hey Bob, thanks for all of the details of your truck! Based on that the correct Torklift Tie Downs are the part # TL66PR which his a set of front and rear tie downs for your truck. Do yo have turnbuckles?

expert reply by: Jameson C

0

Bob M.

1/31/2025

Thank you Jameson and yes I will also need turnbuckles.

Jameson C.

2/3/2025

@BobM We have the FastGuns part # TLS9529-2-LK that would work well.

Answer 1

Hi Sam; is there another connection in the vicinity of the one from your picture? The Brandmotion Tailgate Delete Backup Camera #BM22FR is designed to be used without the tailgate. See the attached photo with the connector. It isn't super clear…

view full answer...

Answer 2

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

view full answer...

Answer 3

To extend a 7-way 48 inches you'd want the part #TLW6048 which comes with a 7-way male on one side and female on the other. If instead you were looking for 10 feet the part #TLW6510 would be what you'd need. These are the best options…

view full answer...

Answer 4

Hello Ken, thanks for reaching out. Sounds like you are on the right track here because the type of running boards on your truck do dictate which tie downs to use. You are also correct that you will not be able to use the tie downs from your old 2002…

view full answer...

Answer 5

Hey Jim welcome back. To determine if you need the TorkLift Camper Anchor Relocation Kit item #TLA7004, you'll have to take a measurement. You'll want to measure from the front bumper of your Palomino HS2902 to the center of the rear anchor…

view full answer...

Answer 6

The correct Torklift Camper Tie Downs for your 2022 Ram 3500 would be the part #TLD2141 and #TLR3510 which is also correct for use with the Torklift 30k hitch that fits your truck part #TLD1111-30. Since you have a dually you will also need to…

view full answer...

Answer 7

Hey Cynthia, thanks for the photo! The quick-disconnect like #104052-MBS is what you want, but you’ll also need to tee into that line. We can’t confirm the exact size from the photo (usually 1/4" or 3/8") and even if we could we don't…

view full answer...

Answer 8

The Torklift #TLA7004 Camper Anchor Relocation Kit does not require drilling into the camper or the truck. The adapter brackets would be attached to the camper by drilling holes at the location of the original anchor point, as shown in the photo…

view full answer...

Answer 9

Do you have a crew cab or a regular cab? Torklift is really particular with their fits but with that last bit of info I should be able to see what solution would work.

view full answer...

Answer 10

Hey Charlie! Looking at your picture it doesn't look like you have any running boards. I'm also assuming you have the factory hitch, is that correct? If so, the tie-downs for your 2024 Ram 3500 are the TorkLift Tie Downs - Custom Frame Mount…

view full answer...

Answer 11

Hey Brian, thanks for reaching out. We do offer TorkLift frame mounter camper tie downs for your 2024 Ram 3500 6.4' bed with cab length steps. You will need the following: - TorkLift Camper Tie-Downs - Custom Frame Mount - Front #TLD2141…

view full answer...

Front and Rear Frame Tie Downs for 2023 Ram 3500 Camper Shell

Product Page this Question was Asked From

Continue Researching