Looking for Replacement Switch for Happijac Camper Jacks

Question

Question:

Hi, 2024 cyclone toy hauler I need the rocker switch for the happy jack bed in the garage. Do you have that switch?

asked by: Carl K

0

Expert Reply:

Hey Carl, I know you said rocker switch but did you by chance mean to ask for a replacement remote for the Happijac system you have? If so, we do have that with part # LC723915. We don't have any other types of switches at this time.

expert reply by: Jameson C

0

Carl K.

11/30/2025

No, not a remote control. It's a rocker switch to raise or lower the beds. It is manual switch

Jameson C.

12/1/2025

@CarlK We don't have anything like that for a Happijac setup. Is this an older setup by chance?

Carl

12/1/2025

@JamesonC It is a new 2024. I will contact lippert

Answer 1

Hello Charles, thanks for reaching out. The Furrion Built-In RV Microwave #FMSN09BL is 13-5/8" tall, so as long as that extra 1/8" isn't a problem, this would be a great option for you. It measures 19-1/16'W x 13-5/8'H x…

view full answer...

Answer 2

I checked out the specs of the Shurflo 4008-101-F65 and the Seaflo Diaphragm Pump for Boats and RVs #SE58FR would be a great replacement as it has the same flow rate of 3.0 gallons per minute and has same PSI rating of 45.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Nice setup Jeff, happy to help! Since you've already ordered the B&W Turnoverball for your 2019 Ram 2500, my recommendation is the B&W Companion Sliding 5th Wheel Hitch #BWRVK3400-5W that's designed for the Turnoverball system.…

view full answer...

Answer 9

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 10

Hello Levan, thanks for reaching out. Yes, the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND is made to replace the Lippert 1621 pin box so the bolt hole spacing and dimensions are the same. Your cab and tailgate clearance will be…

view full answer...

Answer 11

Hey Shayne, yes the Gen-Y Hitch Nomad 5th Wheel to Gooseneck Pin Box #GY57ND that you referenced would need the included spacers to install in place of a Lippert 1716 pin box as that pin box is 1/2 inch wider. What camper do you have? At this time…

view full answer...

Answer 12

Hey Jen, thanks for the information! Since your 2016 Ram 2500 has the Ram Boxes, you'll need to have a rotating pin box installed on your 2026 Jayco Eagle HT DDB. The rotating pin box is the only way to tow a 5th wheel trailer and not hit the Ram…

view full answer...

Looking for Replacement Switch for Happijac Camper Jacks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching