Search: gooseneck to 5th wheel   >  

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The total length of the #KPG5-Q30IP is 29" from the bottom of the kingpin to the top of the tube. This adapter is 15" from the plate to the top of the highest pin hole.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The pin weight of a 5th wheel trailer will usually be around 20% of the trailer's gross trailer weight (GTW) rating. The only real way to find the loaded pin weight of your 5th wheel trailer would require access to a commercial scale used to…

I do have some options available for you however, the Curt X5 5th Wheel Base Rails Adapter part #C16210 is not compatible with the Draw-Tite Underbed Gooseneck Hitches. Unfortunately, there are not any 5th wheel adapter plates that fit the Draw-Tite…

The Curt X5 #C16220 that you referenced is designed to fit the Curt EZr Double Lock Gooseneck Hitch #C60682 for your 2004 Dodge Ram Pickup. Since you have the Hide-A-Goose Underbed Gooseneck Trailer Hitch #9464-35 installed on your Ram the best…

I have a solution for you, but the #C16210 will not fit a Draw Tite Hide a Goose as it only will fit Curt gooseneck hitches. Instead you would want the Draw Tite Hi Rise part #9480 as it will fit your Hide a Goose hitch and will provide you with a…

Yes, the Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter #DM8550045 is designed to attach to a gooseneck ball like what your B and W hitch has and provide a fifth wheel hitch for the trailer you plan to buy so this would be a great…

This is a good question! The Demco Recon #DM8550045 secures by attaching to the hitch ball directly and then pulling up on the hitch ball to keep it from spinning around during operation (see attached photo).

For a grease seal that is used with a Dexter 6,000 EZ Lube axle and hub assembly like part #8-201-9UC3-EZ, you would need part #RG06-090. This comes with a quantity of 2 seals in the package. It has an inner diameter of 2.125 inches and an outer…

The 7-Way Vehicle Power Adapter with Power Switch For Furrion RV Observation Camera #FR87PR will boost the amperage to fix the signal strength of the Furrion Vision S Camera System #FCE48TASL-05. I attached a review video link below.

The Ram Gooseneck to 5th Wheel Trailer Coupler Adapter Inner Tube - Square - 30,000 lbs #KPG5-Q30IP is a 4 inch square tube with a 7/8 inch pin hole diameter. The holes are 2-11/16 inches on center and have a total adjustment height of 8 inches. The…