Trailer Hub for 3,500 lb Trailer Axle with 5 on 5 inch Bolt Pattern
Updated 12/10/2025 | Published 11/13/2025 >
Products Featured in This Question
Question:
I have a Big Tex trailer single axle 3500lbs 5 on 5 pattern without ez lube. I would like to replace the hub assemblies, but all I see are the ez lube ones and I believe the spindels are different? Would like Dexter hubs.
asked by: Jw O
Expert Reply:
Hey JW, we have an idler hub like you are looking for with the part # AKIHUB-550-35-K or if you have trailer brakes and need a hub/drum you'd want the part # AKHD-550-35-K. These are both for 3,500 lb trailer axles, have the 5 on 5 inch bolt pattern you need, and aren't for EZ lube spindles.

Jw O.
12/10/2025
The axle does not have brakes and the part number posted is not a Dexter hub. I was hoping to find a Dester hub replacement.

Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Idler Hub
- Pre-Greased
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Search Results: shipping cost
- Search Results: curt drop hitch
- Search Results: drop hitch
- Search Results: 2 inch ball trailer hitch ball mount
- Search Results: sumosprings rear
- Search Results: trailer hitch
- Search Results: fits 2 inch hitch trailer hitch ball mount
- Shop: Suspension Enhancement
- Q&A: Can Lucas Red N Tacky Grease be Used in Dexter Axle/Hubs
- Q&A: Replacement Grease Seals for a Dexter 5,100 lbs Axle
- Article: How to Measure for Trailer Hitch Drop
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: Curt Adjustable 2-Ball Mount - 2" Hitch - 5-1/2" Drop, 4-1/2" Rise - 15K
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Q&A: Tight Turning Ability with Weight Distribution System Installed
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Q&A: Installation Questions for the SumoSprings Helper Springs on a 2010 Toyota Tundra
- Q&A: Does Install of SumoSprings Solo Kit SSR-610-40 Require Replacing U-Bolts
- Shop: Dexter Grease Seals - I.D. 2.25" / O.D. 3.376" - for 12 in x 2 in Hubs after 1998 - Qty 2
- Q&A: What is Hub Bore Diameter of Trailer Idler Hub # TRU33AV
- Q&A: Replacement Idler Hub for 3,500 lb Big Tex Trailer Axle with 5 on 5" Bolt Pattern
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Pacbrake Alpha Air Bag Suspension Kit Review and Comparison
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


Jameson C.
12/8/2025
Hey JW, how did the new Dexter hub work out on your Big Tex trailer? It’d be great to hear if the fit matched your 3,500‑lb axle as expected. Your update could make it easier for the next person with the same setup.