How to Determine Which Dexter Lift Kit Will Fit a 2020 InTech Sol Dawn?

Updated 09/21/2021 | Published 09/20/2021

Question:

Is this the correct kit for a 2020 InTech Sol Dawn? The InTech website says #10 axle is used for all Sol models, but the lift kit will not fit a high profile 45 degree down axle. How do I know which axle is on the camper? It isn’t a Rover model.

asked by: Carrie

Expert Reply:

Though I can confirm that InTech does use Dexter torsion axles, I was unable to find exactly which one and what angle is used on your 2020 Sol Dawn. So with that being said, what you will need to do is contact InTech with your VIN and they should be able to tell you exactly what was installed. They keep stuff like this on file for reasons like this. Odds are the Torflex Lift Kit # K71-707-01 will be the correct one, but I definitely suggested confirming your axle first.

However, if for some reason they cannot tell you which axle you have installed, try to find the label on the axle and take a few pictures. It may not hurt to also remove one of the wheels to the torsion bar for the axle is visible. If you can get me pictures of those, I should be able to find some more information for you.

expert reply by: Lazer S