Result: slipper spring hanger kit

On a standard 5 bolt electric brake like the Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 7,000 lbs item #23-181, The bolt holes measure 3-7/8 inches from one corner to its diagonal counterpart. From hole to hole across the bottom…

Knowing the weight capacity of your axles is a good first step in determining if the Electric Trailer Brake Kit - Self-Adjusting #AKEBRK-7-SA will fit your Logan 7903 LQ. You will also need to know the mounting flange bolt pattern on your axle, your…

Yes, you can use the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs item #23-180-181 on your 5,200 lbs axle so long as you have a 5 bolt flange like the one linked in the diagram below. These brakes fit a…

There isn't a specific distance the hangers have to be for hanger kit #AP216-H238. A good place to start is 30-1/2 inches on center but you would only really know by mocking it up on the trailer before permanently installing the hangers. To…

I'm not sure of which exact leaf spring you have but in regards to welding the hangers to the frame, it's best to mock them up with the spring you plan to use prior to welding. This is the case for the Single-Axle Trailer Hanger Kit for…

Yes, the 4-Leaf Slipper Spring w/ Radius End #SP-179275 that you referenced will fit and work well on your trailer that currently has flat slipper ends. The capacity and length matches well so this would be a really solid choice. I attached an…

Thanks for the picture! While we do not have an exact replacement for a Profile 2000 winch we do recommend the Dutton-Lainson Hand Winch item #DL14627 as a replacement. This winch has an 1,800 lbs capacity and will work great with the 20' x…

You can use springs with a lower capacity than your existing springs to help provide an easier ride for your PWC. The #SP-178275 springs are a great choice. It is important to keep in mind that going with a lower weight rated spring will reduce the…

Yes, trailer suspension equalizers are measured from hole center to hole center. The 10-1/8-inch dimension provided for the swan-shaped equalizers in kit #AP302-H302 is from the two outside holes as shown in the linked image.

Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.

A 205/75R15 size trailer tire has an overall diameter of 27-inches when inflated and will fit on four different widths of rim: 5-inch, 5-1/2-inch, 6-inch and 6-1/2-inch. Tire sizes of 13-inches and larger will fit on multiple rim widths. The linked…

Yes, you can replace the axle on your trailer with one that is rated higher. This will ensure that the axle is rated for more than enough weight. But you will also need to upgrade the suspension, tires, and possibly the wheels and the trailer coupler…