Will Stealth Hitch Interfere With Kick Sensor on 2022 BMW X5

Question

Question:

Will this retain the ability to open the hatch using foot wave?

asked by: Jim

0

Expert Reply:

Hi Jim; the Stealth Hitches Hidden Rack Receiver # SH64MR will not cause the loss of functionality for the kick sensor. With the receiver installed you may have to put your foot on either side to trip the sensor. With the receiver removed it will work just like it does now. Keep in mind, this is designed to fit the X5M and X5M Competition. If you have a different X5 model you will need a different Stealth hitch.

What are you planning to use the hitch for?

expert reply by: Robin H

0

Stealth Hitches Hidden Rack Receiver
(click to enlarge)

Jim

9/7/2025

2002 x5 40i - it came came up as fitting my car.

Robin H.

9/7/2025

@Jim 2002 or 2022? I will assume 2022 since that is what you entered originally and none of these fit the 2002. On the product page for the # SH64MR it says M models. If you went through the fitguide the only one that would have popped up is the # SH89VR which is the correct hitch for the 2019-2026 X5 40i.

Jim

9/7/2025

Went back and realized my mistake - never saw the M under the price. Reordered the correct hitch VR model. How do I return the other unopened MR hitch?

Robin H.

9/7/2025

@Jim returns are handled through our customer service department. You can call them at 800-298-8924 or email [email protected]. I will forward this to them as well. They're around right now on Sunday so calling will be the fastest way to resolve it, followed by email.

James

9/7/2025

@RobinH Thanks Robin. Total miss on my account but it looks like the correct hitch will be here in time for Thursday dropoff for installation. I'll call them now.

Answer 1

The installation of the #SH89VR on your 2022 BMW X5 will not be as extensive as our installation video since it includes the wiring harness install. However, it is still a fairly extensive installation that requires removing a lot of parts to access…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will Stealth Hitch Interfere With Kick Sensor on 2022 BMW X5

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching