Will The AC Kit ADV25SR Replace A Dometic Penguin II On A 2007 Forest River Cedar Creek Silverback?

Question

Question:

Hello, I have a 2007 Forest River Cedar Creek Silverback Fifth Wheel and I’m looking to replace a rooftop ductless air conditioner in the bedroom just checking to see if this one will be compatible. currently I have a dometic penguin ii I believe.

asked by: Nadine M

0

Expert Reply:

Hi Nadine!

The Advent Air Low Profile RV Air Conditioner System - Manual - 13,500 Btu - Black - R32 # ADV25SR will fit the standard 14" x 14" cut out your current Dometic Penguin II fit, so you are good to go! This is usually where I go into a whole thing about needing a completely new set up as the R32 coolant models aren't backwards compatible with the old R410a units, but the # ADV25SR is a full kit and you will not need any other parts to get it up and running.

Was the one you are replacing the original?

expert reply by: Lazer S

0

Nadine M.

9/10/2025

Yes the one I’m replacing is the original. Thank you for your answer:)

Lazer S.

9/10/2025

@NadineM Pretty good life out of the original one! I hope this one serves you just as well, if not better! Let me know if there is anything else I can help with! : )

Nadine M.

9/10/2025

@LazerS thank you so much.

Lazer S.

9/10/2025

@NadineM You're welcome! : )

See All (7) Replies to Nadine M. ∨

Answer 1

Hey Harry. The best option to install a low profile AC system for the bedroom of your Grand Design is with the Advent Air Low Profile RV Air Conditioner System item #ADV45SR in white or item #ADV25SR in black. These 13,500 Btu systems come with…

view full answer...

Answer 2

Yes, you can Tom. The Electric Heat Strip for Advent Air RV Air Conditioners item #ADV34QR is exactly what you need for the Advent Air Low Profile RV Air Conditioner System item #ADV25SR, you were looking at. It'll draw 13.6 amps while being…

view full answer...

Answer 3

Hey Blake, the kit you'd need to install an Advent Air Low Profile RV AC unit on the roof of your enclosed trailer would be the part #ADV25SR. This is designed for new installs like what you have and comes with the correct lower vent assembly…

view full answer...

Answer 4

Hey Ron, it wouldn't work because that is an older style air box and starting in 2025 the RV AC units had to switch to a different refrigerant. This means the lower vent assemblies had to change as well. This means you'd need a current kit…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 9

Hi JD; the Furrion Chill Cube #FR49TD air distribution box has a vent on it you can open and close. See the picture attached below. When it is closed it forces more of the air through the ducted system. Assuming you have a ducted system you will need…

view full answer...

Answer 10

Hey Matt, Furrion typically has 4 wires running to their thermostats and the Chill Cube Thermostat #LC74DX is no exception. The harness you see with the thermostat would plug into the Chill Cube's controller and has 4 wires to extra wire to to…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Will The AC Kit ADV25SR Replace A Dometic Penguin II On A 2007 Forest River Cedar Creek Silverback?

Continue Researching