Does Curt Hitch for 2024 Ford Ranger Fit with Full Size Spare

Question

Question:

2024 ford ranger has a full size spare tire mounted underneath . It looks really tight under there. Are there any issues with lowering the spare tire with a Curt trailer hitch.

asked by: Mike

0

Expert Reply:

Hey Mike, the Curt hitch part # C82ZV that fits your 2024 Ford Ranger does fit pretty tight with the spare like you can see in the attached picture but the good news is that there aren't any real issues and it's not difficult to raise or lower the spare with the hitch installed. Worse case scenario is you can push back on the spare as your raise/lower it and that will help provide the needed clearance.

expert reply by: Jameson C

0

Curt Hitch with Spare
(click to enlarge)

Mike

8/29/2025

Thank you. I can see in the photo that I may need to push back the tire to lower the spare.

Jameson C.

9/2/2025

@Mike Yeah that makes sense. I've installed hitches that require this and it's not too bad to do.

Answer 1

Hi Bryant, It's definitely a smart idea to check and make sure, and I can verify for you that yes, the Curt Trailer Hitch Receiver #C82ZV 100% will fit your 2024 Ford Ranger. I went ahead and confirmed this fit with Curt for you as well.

view full answer...

Answer 2

Hi Steve! We do have a Class IV hitch available for your 2021 Ford Ranger, but the Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #DT35PR is specifically for a 2024 to 2027 (so far) Ranger. For your 2021, you will want…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Tom! I personally like the etrailer Hitch #e37ZV because it has a matte black finish that protects the metal better than a standard glossy black finish, but I see you picked up the Draw-Tite #DT35PR which is also a great hitch that I know…

view full answer...

Answer 5

Both the Curt #C13382 and the etrailer #e98912 hitch are a 2" Class III hitch receiver that will provide a maximum gross trailer weight of 3,500 lbs and a maximum tongue weight of 525 lbs. You are correct, they are an identical hitch but our…

view full answer...

Answer 6

Hi there Tim; we do have hitches available for your 2025 Ford Ranger. I recommend the Draw-Tite #DT35PR. This is a Class IV hitch with a 2" receiver and a bolt-on installation. It has a 7,500 lb towing capacity and comes with a limited lifetime…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 12

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Does Curt Hitch for 2024 Ford Ranger Fit with Full Size Spare

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching