Replacing a 2015 Toyota Tacoma 7-Way Receptacle with a 4-Way/7-Way Receptacle
Updated 09/12/2025 | Published 08/25/2025
Question:
I have a 2015 toyota tacoma with a 7pin trailer harness how do I connect a 4way trailer harness to the 7pin harness to be routed back to the rear plug with the 4 and 7 pin receptacle?
asked by: Kalani L
Expert Reply:
Hey Kalani, thanks for reaching out!
You can actually use an adapter plug like the Hopkins Endurance # HM75MV to get both 4-Way and 7-Way receptacles on your 2015 Toyota Tacoma.
To install this you'll pull the USCAR connector plug from the back of your current 7-Way, secure the Hopkins adapter to your truck, and then plug the USCAR connector into the back of the Hopkins adapter and you'll be good to go!
Are you just needing more wiring options for towing a trailer?
Continue Researching
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Custom Harness - Dash Knob - Up to 2 Axles - Proportional
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: Air Lift 1000 Air Helper Springs for Coil Springs - Rear
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class V XD - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Shop: Trailer Connector Adapter - EZ Connector to 7-Way RV - Vehicle End
Jon G.
9/12/2025
Hey Kalani, did the Hopkins adapter work out for your Tacoma? I'm curious if it provided the wiring options you needed for towing your trailer. Let me know, as it could help others with similar setups!