Recommended Hitch for a 2026 Genesis GV70

Question

Question:

do you carry a trailer hitch for a 2026 genesis GV70. dont need wiring harness as it is just for bike rack and carrier

asked by: John W

0

Expert Reply:

Yes, we do John! We just got the Curt Hitch item # C37DQ. This 2" hitch is custom fit for your 2026 Genesis GV70. It comes with all hardware necessary for installation and has a 3,500 lbs towing capacity and a maximum tongue weight of 525 lbs.

I have attached a picture below of what the hitch is going to look like installed, along with a link to the installation instructions.

What kind of bike rack do you have?

expert reply by: Jerred H

0

Genesis GV70
(click to enlarge)

John W.

10/6/2025

jerrod, i have a 2" L verticle bike rack for 2 bikes.do you know if this extends out past bumper or is flush.looks like it might be recessed a little.

Jerred H.

10/6/2025

@JohnW There's another picture in the instructions and it looks like the hitch pin hole is 2-1/2" - 3" recessed behind the bumper. We do not have measurements on this hitch yet.

John

10/6/2025

@JerredH Thanks jerrod.gonna find someone to install it and will get back to you soon as i find someone

Jerred H.

10/6/2025

@John You're welcome! I can help with that. If you go to the product page of the Curt Hitch item # C37DQ you purchased and scroll down below the pics on the left side you'll see a box that says, SCHEDULE AN INSTALLATION. Go ahead and click on it and it will take you to a page where you'll be able to enter your zip code. Once you do this you'll be connected to our network of reputable installers in your area.

Nicolas

11/6/2025

Is it a new part number according to the 2026 GV70 facelift? As OEM spec a different part number to fit ‘26 vs 25-22. Thanks!

Jerred H.

11/6/2025

@Nicolas Yes, it is. The Curt Hitch item # C37DQ was just released a couple of months ago. It does indeed fit the 2026 Genesis GV70.

Dave H.

4/6/2026

@JerredH, does this fit the GV70 Electrified for 2026?

Jerred H.

4/6/2026

@DaveH It does not Dave!

Answer 1

Hey Steve, congrats on the new SUV. We do indeed have those parts so save the trip to the dealership! To add a hitch to your 2026 Genesis GV70, I recommend the Curt item #C37DQ. This custom fit class III hitch has a 2" receiver, a 3,500 lbs…

view full answer...

Answer 2

No, I am sorry John so far we do not. As of 09/11/2025 we do not have a hitch for a 2026 Genesis GV70. I recommend checking back in a couple months. The hitch manufacturer's need to get their hands on one of the new vehicles to see if the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Recommended Hitch for a 2026 Genesis GV70

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching