Do You Have a Hitch for a 2026 Genesis GV70?

Question

Question:

do you carry a trailer hitch for a 2026 genesis GV70.dont need wiring harness as it is just for bike rack and carrier

asked by: John W

0

Expert Reply:

No, I am sorry John so far we do not. As of 09/11/2025 we do not have a hitch for a 2026 Genesis GV70.

I recommend checking back in a couple months. The hitch manufacturer's need to get their hands on one of the new vehicles to see if the existing hitch fits or they need to design a new one.

expert reply by: Jerred H

0

Jerred H.

9/29/2025

Hey John, did you have a chance to find a trailer hitch for your Genesis GV70? I'm curious because it could help others looking for similar solutions.

John W.

9/29/2025

@JerredH not yet still looking dealer wants absurd amount for hitch

Jerred H.

10/6/2025

@JohnW I have good news for you! We just go the Curt Hitch item # C37DQ for your 2026 genesis GV70. Curt just came out with this one.

Answer 1

Yes, we do John! We just got the Curt Hitch item #C37DQ. This 2" hitch is custom fit for your 2026 Genesis GV70. It comes with all hardware necessary for installation and has a 3,500 lbs towing capacity and a maximum tongue weight of 525 lbs. I…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 12

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Do You Have a Hitch for a 2026 Genesis GV70?

Continue Researching