Looking For 6-Lug Hubs For Dexter 3,500 lb Idler Axle
Updated 09/02/2025 | Published 08/12/2025
Products Featured in This Question
Question:
I have a trailer with Dexter 3500 idler axle. I want to switch from 5 lug to 6 lug hubs. Not sure which ones will fit this axle. It’s a 18 model utlity trailer.
asked by: Chris
Expert Reply:
Hello Chris, thanks for reaching out. We do carry 6-lug hubs for a Dexter 3,500 lb axle. For that I recommend the following:
- Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 6 on 5-1/2 - Pre-Greased # AKIHUB-655-35-EZ-K
This fits a standard 3,500 lb axle. It uses the # L68149 (1.378" inner diameter) inner bearing and # L44649 (1.063" inner diameter) outer bearing. As long as your axle was made within the last 20 or so years it should use this same standard bearing combination. Older axles may not be made to this same standard though.
Any idea when your axle was made? Does it still have a tag or sticker attached? That should help me confirm which hub will fit. Or if you can see a part number cast on the current idler hubs, I may be able to use that to pull up your bearing info. Just want to be sure you are getting the right thing. But like I said if you axle is less than 20-25 years old you will be fine and the hub I mentioned above will work great. The hub will work with wheels from 14-1/2" to 16-1/2" in diameter.
(click to enlarge)
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Idler Hub
- EZ Lube
- 25580 / LM67048
- Standard Grade
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Search Results: ebrhx~adh~na
- Search Results: 118467
- Search Results: esco breakaway switch
- Search Results: ekko
- Search Results: 3070~p
- Shop: Trailer Hitch
- Shop: Vehicle Tow Bar Brake System
- Search Results: 800144
- Search Results: 2010
- Shop: Titan Chain Clevis Hook w/ Spring Loaded Latch for Chain w/ 5/16" Thick Links - 4,700 lbs
- Shop: Roadmaster Tow Bar Cover
- Shop: Roadmaster Battery Disconnect for Towed Vehicle w/ Flat Tow Brake System - Gas Only
- Shop: Erickson Re-Tractable Ratchet Straps w/ Push Button Releases - 2" x 10' - 1,100 lbs - Qty 2
- Shop: Base Plate for Tow Bar
- Q&A: Installing Old Tekonsha Weathertronic Electric Brake Controller
- Shop: Second Vehicle Kit for Demco Air Force One Flat Tow Brake System
- Shop: Brake Controller
- Shop: Blue Ox Universal Bolt-On Base Plate Brackets - 5,000 lbs
- Shop: Deluxe Compartment Door Thumb Latch - 5/8"
- Q&A: Replacement Pin for ESCO Trailer Breakaway Kit
- Shop: Trailer Wiring
- Q&A: Difference Between Timbren Axless Suspension Systems T54KV and T99GR
- Q&A: What Is The Difference Between Timbren xle-Less Trailer Suspension T54KV And TASR5200S03?
- Q&A: What Parts Do I Need to Install the Timbren Axle-Less Trailer Suspension # T99GR?
- Q&A: Can Timbren Axle-Less Trailer Suspension System Be Welded To Trailer For Installation
- Q&A: How to Use a 3,500Lb Timbren Axle-Less Trailer Suspension System with 6 on 5-1/2 Inch Bolt Pattern
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
Jesse M.
9/2/2025
Hey Chris, did you find out when your axle was made or if it has a tag or sticker? I'm here to help ensure you get the right hub for your trailer. If you’re still looking for a solution, I’m happy to help.