Does Replacement Controlled Motion Hinge Kit Come with 1 or 2 Hinges?

Question

Question:

Is Part Number: LC85TX one or two hinges? Picture shows two hinges and 29 screws!

asked by: Don

0

Expert Reply:

Hey Don, thanks for reaching out!

The Replacement Controlled Motion Hinge Kit # LC85TX comes with 2 5-Leaf hinges and 30 screws. Sorry for any confusion!

Check out the linked video and photo to see what I'm talking about.

expert reply by: Jon G

0

Replacement Controlled Motion Hinge Kit
(click to enlarge)

Jon G.

8/15/2025

Hey Don, did the Replacement Controlled Motion Hinge Kit work out for your RV entry door? I'm curious because it could help others with the same question!

Answer 1

With your trailer not currently measuring propane levels, I would recommend going with the SeeLeveL RV Holding Tank Monitoring System #SE39VR which comes with the water pump switch. The reason for that is because the SeeLeveL RV Holding Tank…

view full answer...

Answer 2

Hey Teresa, The Replacement Entry Door Hinge #LC198295 has a 9 1/4" overall length so it sounds like it'll be too tall for what you need. For something shorter, we have the 5-Leaf alternative that comes in Black #LC85TX or White #LC25TX and…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

While we don't carry a hinge with the exact leaf setup as what you have pictured, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR is still a viable replacement option. Since the leaf configuration is slightly…

view full answer...

Answer 6

Hello again, Scott. So yes, a hitch mounted rack is definitely the way to go if you need to carry a few beach cruiser style bikes. We do have a solid 2-bike option that will work well for that. Here is what I recommend: - Hollywood Racks Trail Rider…

view full answer...

Answer 7

The only black replacement hinge option we carry is the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR. This hinge will work as a replacement but you'll notice the mounting holes most likely won't match up so…

view full answer...

Answer 8

Hey Kyle, thanks for reaching out! The screen you're seeing behind the photos we have of the Lippert Screen Door Slider Panel #LC239061 aren't something that we carry, but as I'm looking at the photos, the screen looks like it installs…

view full answer...

Answer 9

Hey Ed, it sounds like you are looking for an RV entry door hinge like the part #LC95VR. This is one that all is designed to stop the door from slamming around. Is this what you were looking for?

view full answer...

Answer 10

Hey Cliff, with the Replacement Controlled Motion Hinge #LC95VR to get the desired effect where the door doesn't swing open or closed all you have to do is replace is a single hinge and not all three.

view full answer...

Answer 11

No the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black #LC95VR does not come with mounting hardware. You will need to reuse the existing hardware or source new hardware.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Does Replacement Controlled Motion Hinge Kit Come with 1 or 2 Hinges?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching