bing tracking image
  1. Smart RV
  2. SeeLeveL
  3. Propane Tanks
  4. Water Tanks
  5. Monitoring System
  6. Monitors Only
SeeLeveL RV Holding Tank Monitoring System - Fresh, Gray, Black, Propane
SeeLeveL

SeeLeveL RV Holding Tank Monitoring System - Fresh, Gray, Black, Propane

Part Number: SE59VR
$298.02
Smart RV
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.
By submitting this form, you understand and agree to our Terms of Sale, Website Terms of Use and Privacy Policy.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Need help with installation?
Locate installers near me
If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveL sensors track 3 holding tanks with single-digit accuracy at the monitor. Also displays your propane level and battery voltage. Great Prices for the best smart rv from SeeLeveL. SeeLeveL RV Holding Tank Monitoring System - Fresh, Gray, Black, Propane part number SE59VR can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (36)
  • Q & A (0)
  • Photos

SeeLeveL Smart RV - SE59VR

  • Propane Tanks
  • Water Tanks
  • Monitoring System
  • SeeLeveL
  • Monitors Only
  • Digital Display

If your RV tank monitor readings change from 25% to empty in the blink of an eye, that's a problem. SeeLeveL sensors track 3 holding tanks with single-digit accuracy at the monitor. Also displays your propane level and battery voltage.


Features:

  • Monitoring system tracks and displays the levels of your RV's holding tanks at the push of a button
    • Hardwires to SeeLeveL sensors - includes (3) 12" sensors for fresh, gray, and black tanks
  • Sensors mount to the outside of the holding tanks rather than using interior probes
    • Prevents false readings caused by accumulating debris
    • Provides readings with single-digit accuracy
    • Can be trimmed or stacked with an additional sensor to match your tank size
  • Display monitor also shows your propane levels and battery voltage
    • Diagnostic mode checks status and signal strength of sensors
    • Error codes alert you of any issues - check the manual for suggested solutions
  • Multiple monitors can be used so you can check tank status from the service bay and inside your RV
  • Easy installation - cut hole for recessed mount monitor, attach sensors on tanks, and hardwire together
    • Includes pigtail needed for installation
    • Tabs on top of sensor are trimmed to indicate which tank it is on
    • Length can be trimmed every 1-1/2" to match the height of your tank
    • Bus wiring lets all sensors splice together to one line
    • Existing wiring from your old tank monitor system can be used to ease install


Specs:

  • Application: 3 tank systems for RVs and motorhomes
    • 1 sensor can accommodate 5" - 13" tall tanks
    • Stack additional sensor to accommodate tanks up to 25" tall
  • Monitor dimensions: 4" wide x 2-13/16" tall x 1-1/4" deep
  • Operating temperature range: 32 F - 140 F
  • Operating voltage range: 11V - 16V
  • Sensor quantity: 3
  • Sensor length: 12"
  • 1-Year limited warranty


Note: SeeLeveL tank monitoring systems are not compatible with metal tanks.


Advanced RV Tank Monitoring

Traditional tank monitors have a reputation for being unreliable. Only a few sensors are installed inside, meaning that they usually only measure in quarter increments and can send false readings if they get dirty. When you're keeping an eye on how much fresh water you have, the difference between 25% full and empty means a lot, and that inaccuracy can be a problem.


The SeeLeveL tank monitoring system uses technology that can sense fluid levels from the outside of the tank. The sensors' flexible circuit board sticks in place and measures along its entire height. This makes it accurate in single-digit increments.


LPG Monitoring

LPG tank equipped with a remote sensor

Large RVs with permanent propane tanks often feature wired sensors on their gauges. These can go by different names, such as LPG gauge sensors, tank level monitors, remote ready dials, or R3D dials. If your RV has an interior panel for monitoring LPG levels, you know you're good to go with wiring already in place for an easy install. If you're not sure, check the tank itself. If the gauge has a wired sensor attached to it, you can connect it to the SeeLeveL monitor.


SeeLeveL sensors used for fresh, gray, and black tanks will not work on metal tanks of any kind, including LPG tanks.



709 SeeLeveL RV Holding Tank Monitor for 3 Tank Systems - Battery and Propane

710-ES2 SeeLeveL Sender for RV Holding Tank Monitor Display - 12" Long - 7 Tanks

Installation Details SE59VR Installation instructions



Customer Satisfaction Score:

Ratings & Reviews

4.7

36 reviews
5 Stars
(29)
4 Stars
(4)
3 Stars
(3)
2 Stars
(0)
1 Star
(0)
Review Sort Icon
by:
Excellent service the product seems to be working well
by:
Good
Follow through and was kept up to
date on delivery. Satisfied
by:
Great product. They work very well.
Woul
d purchase again.
by:
These sensors are so much better than the internal probes because they don’t get gunk on them. You can set the sensors on the outside and the positions that you want and it reads by percentage. I would definitely buy them again.
by:
Dan profile picture

Dan

2/22/2024

Outstanding ! The confidence with accurate tank level readings is a game changer. Not surprised that many mfgs have them standard on current model RV’s.

Jesse M. profile picture
Etrailer Expert

Jesse M.

2/22/2024

@Dan You got that right! Thanks for sharing Dan.
by:
It is a Christmas present so I haven’t opened it yet.
by:
Awesome product!!! Now I can really see how full each of my tanks are!
by:
Love it!
by:
by:
by:
by:
by:
by:
by:
The selevel monitoring system was perfect to correct a issue I was having with the factory installed sensors.
by:
Much easier to install than I expected. My fresh tank is surrounded by a metal shroud and required peeling half of the paper back and sneaking the sensor over the top, aligning the top to the sensor with the tank and pressing it in place through a wiring hole. then grabbing a corner of the paper and pulling it the rest of the way out. It sounds tricky but while the adhesive feels very secure it wasn't grabby. I could lightly lay an edge in place and still reposition. I don't think you could safely reposition if a large area stuck. The metal shroud is less than an inch from the sensor and it is working great, (many warnings in the instructions about keeping metal away, (These work on capacitance so a piece of metal can influence the sensor) The black and gray had to go on the ends because there wasn't room between the support rail the tanks hang from and the tank for the sensor to fit. You have to download instructions but really all you need to know is all of the sensor blue wires connect together with the blue line on the monitor and the black lines on the sensors can ground to the frame or I just wired them all together with the black ground on the monitor (and grounded that) And the red is 12 V positive. The white connects to the pump positive at the switch to light the monitor panel led. I have a 24V water pump and it didn't like it so I don't have the led. The switch is a SPDT so it can be wired with another 3 way switch to allow controlling the pump from two locations, or not.
by:
Very easy to install and have worked great far. It's nice to have accurate meters.
by:
Great customer service
by:
Small accurate, just what was needed
by:
An excellent system! Simple reason: designed and Made in Canada! To date, "etrailer" was a great source for the various items required for our production line and we did not mind buying a Canadian product in the US. But obviously, in light of recent political events, this practice is no longer logical nor viable. Canadian RV folks and Vanlifers, take note. This item, and most of the others, are available in Canada.
by:
We put the SeeLeveL system in our camper van about a year ago, and it has been a game changer for us. Before installing the system we only had a visual check on water level, by looking at part of the tank under the seat bench in the back of the van. It was inconvenient and because the tank is only semi-translucent, not always very accurate. The monitoring system remedied that. In addition, I can now monitor tank level while filling the tank by watching percent full from the back of the van... filling the tank used to be a two-person job. Finally, we have a 5 gallon gray water tank under the sink... we attached one of the sensors to the gray water tank, epoxied it for extra support, and wired the sensor to the system using flat electrical connectors so that it can be easily removed from the van for disposal of the gray water. It works like a charm, enabling us to monitor both fresh and gray water in the van. It was a simple installation, and I highly recommend the product.
by:
The installation of these tank level sensors was straight forward. The video from Garnet Instruments was very helpful. I had to order a cable from FireFly Integrations to connect the 709 panel into the CAN bus system in my RV. My tank readings are now more accurate and not subject to interference from debris inside my tanks. Very happy with this product.
by:
I still have not managed to install the sensors. The side walls of the gray and black tanks are stepped, making the installation of the sensor strips a bit more complicated (vs, tanks with vertical side walls). Also I'm a little hesitant about how to connect the wiring.

I think (hope) it will be great when I'm done, but the process is more complicated than I expected.
by:
Package arrived ahead of schedule - thanks.

We’ll have the see Level system installed by professionals.

All appears to be good.
by:
Works just like it is supposed to
25
36
true
Show More Reviews

See what our Experts say about this SeeLeveL Smart RV


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Noah M
Updated by:
Noah M
Employee Tim N
Updated by:
Tim N
Employee Amanda M
Edited by:
Amanda M
Employee Jonathan Y
Video by:
Jonathan Y
Employee Thomas T
Video by:
Thomas T
Employee Jacob H
Test Fit:
Jacob H
Employee Kevin C
Test Fit:
Kevin C
Employee Cody B
Written by:
Cody B

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


Product Experts Available Now!
Call 1-800-940-8924