Does the Demco Tabless Base Plate Kit DM9519045 Use All New Hardware on a 2024 Jeep Wrangler?

Updated 08/15/2025 | Published 07/16/2025

Products Featured in This Question

Demco Tabless Base Plate Kit - Removable Arms

(409)

$469.31

etrailer SD Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(334)

$852.66

Question:

THANKS FOR INFO. ON THE OTHER TOW BAR.HOW ABOUT THE MODEL DM9519045. IT LOOKS LIKE YOU ONLY HAVE TWO BOLTS IN THE FRAME AND ONE IN THE OFFSET BAR. THAT EXTENDS BACKWARDS, DO YOU REUSE THE BOLTS THAT COME OUT THE BOTTOM OF THE FRAME TO INSTALL THIS BAR ?

asked by: TIM H

Expert Reply:

You're welcome Tim. The Demco Tabless Base Plate Kit item # DM9519045 utilizes all new hardware when installed on a 2024 Jeep Wrangler. You won't have to reuse your old bolts. Please note that this baseplate kit will only work with the standard factory bumper.

Here are the rest of the parts you'll need to flat tow your Jeep:

Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar - RV Mount - 2" Hitch - 6,000 lbs item # e34ZR

Wiring Harness - Hopkins Custom Tail Light Wiring Kit for Towed Vehicles item # HM56202

Supplemental Braking System - Brake Buddy Select 3 Portable Supplemental Braking System item # HM39524

High Low Adapter - The tow bar needs to be within 3" of level. If you measure the height of the inside top of the hitch receiver tube on your RV, and the height difference is more than 3 inches above/below the base plate tab height, you'll need a high/low adapter. I have linked a FAQ article that explains all this in more detail along with our selection of adapters.

What kind of motorhome do you have?

expert reply by: Jerred H

Jerred H.

8/15/2025

Hey Tim, did you get a chance to install the Demco Tabless Base Plate Kit on your Jeep? I'm curious to know how it worked out for you, as it could help others in a similar situation.