Troubleshooting Fit of Curt Hitch C12270

Question

Question:

The product did not fit as said would

asked by: Icis M

0

Expert Reply:

What vehicle do you have and does it seem like it's totally the wrong design or maybe some of the bolt holes don't line up properly?

expert reply by: Jameson C

0

Jameson C.

8/7/2025

Hey, did you find out if it was the design or the bolt holes that caused the issue with the trailer hitch receiver? I'm curious because understanding your experience can help others facing similar challenges.

Matthew H.

10/22/2025

@JamesonC I have a 1996 Subaru Outback wagon (bg platform), and this hitch is advertised as being compatible, but is it really? Pictures for this hitch on the website show it mounted on a 2000-2004 Outback (bh platform). Is there any way I can help to confirm fitment to bring closure to this question?

Jameson C.

10/22/2025

@MatthewH It is not listed as a fit for a 1996 Subaru Outback Wagon. Sorry for the confusion on that.

Matthew H.

10/23/2025

@JamesonC The Legacy Wagon and the Legacy Outback unibodies are identical.

See All (4) Replies to Jameson C. ∨

Answer 1

I'll give you all of the customer advice we've had to help you find the connector to install the Tow Ready Harness part #118461. The first one I believe is the most likely solution. The wiring harness was a simple plug in, by the left…

view full answer...

Answer 2

Hey Jim, thanks for reaching out! The only hitch we have to fit a 1999 Subaru Legacy Outback Wagon is the Curt #C12270 which is a Class II hitch with a 1-1/4" receiver. The wording on your title can be confusing so I'm adding a dimensional…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 8

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Troubleshooting Fit of Curt Hitch C12270

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching