What is Purpose of Spacers from Furrion Chill HE for Coleman Setup

Question

Question:

What are the 4 spacer looking items in the accessory pack/kit for?

asked by: Eugene H

0

Expert Reply:

Hey Eugene, this kit is actually no longer available but those spacers were part of a bracket that was supposed to help it fit to the lower unit of a Coleman AC unit. We found that these types of adapters don't consistently work well though so we stopped offering them due to warranty issues.

expert reply by: Jameson C

0

Eugene

7/2/2025

Thanks much. The furrian mounted to the mach 15 cieling bracket with no issues. Up and running works well. Thus far happy with the unit.

Jameson C.

7/2/2025

@Eugene Really? that's awesome! Is this the kit you used too?

Answer 1

Thank you for reaching out! The best thing for your situation is to go with the 3,500 lb Dexter Axle #T3584F-8974 you are looking at. While you can upgrade your axles to the 5,200 lb #e55GR, you won't really see a benefit from it unless you also…

view full answer...

Answer 2

The Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor part #ACM135C is designed for roofs 14-1/4" x 14-1/4" ranging from 2-1/2" to 5" thick. If the roof thickness does not meet this minimum requirement you…

view full answer...

Answer 3

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 4

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Lars, welcome back! I can indeed confirm that the Furrion Variable Speed Chill Cube air conditioner with a heat pump is indeed really happening. They are currently available for order (02/04/26) and will be shipped out towards the middle of next…

view full answer...

Answer 7

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

What is Purpose of Spacers from Furrion Chill HE for Coleman Setup

Product Page this Question was Asked From

Continue Researching