To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These Curt fifth wheel legs are specially designed to attach to the receivers in your Ford factory 5th-wheel towing prep package.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Curt OEM fifth wheel hitch legs for the Ford Super Duty towing prep package. These have a 24,000 pound towing weight capacity. This is a custom fit part. It is designed to fit the 2011 and newer Ford Super Duty trucks with the factory-installed towing prep package. Now, on any custom fit part, I always like to recommend to go to our website, using our Fit Guide, put in your year and model vehicle, and it will show if these will work for your application. Now, these legs, these are the fifth wheel base, which is specifically designed to attach to the receivers in your Ford factory fifth wheel towing prep package. These legs are designed to work with the Curt A-16, A-20, E-16, Q-16, Q-20, and Q-24 hitch heads, which we do sell separately on our website. Basically, the hitch head would bolt right in to here, the legs on the side is what would drop into the truck bed of your vehicle. Now, they do use a quarter-turn anchoring system for quick installation and removal.
I just want to rotate this to show you how that works. If you notice, there are two handles right here. So, we're going to pop open the pin and clip, we'll take that out. That will unlock it. You can see these handles will rotate out a quarter of a turn and, when you do that, it rotates these tabs, which then will allow these legs to drop into the pucks that are in your Ford factory package towing package.
You'll do that on each corner. Once they drop in there, then you just rotate those handles back and you'll notice that will rotate the tabs. That will lock them into those pucks on your factory unit. Then just take your pin, run it right through the holes in the handles. Go ahead and clip it and that will keep the handles from opening and then you're all attached, ready to go. To remove it, it's the same way. Just pop the clip and open it up. These anchors right here, you'll notice the nuts right here, these can be adjusted to eliminate any chucking between the legs and the under bed rails.
These parts are protected by a highly durable carbide black powder coat finish and they are co-cured in a rust-resistant liquid Bonderite coating. Again, the gross towing weight capacity on these legs is 24,000 pounds. One last note. You do never want to exceed the rated towing capacity of your vehicle. But that should do it for the review on the Curt OEM fifth wheel hitch legs for the Ford Super Duty towing prep package with a 24,000 pound weight capacity.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Ratings & Reviews
Thomas D.
5/4/2021
Going strong, without issue
Craig A.
8/24/2020
Working great. Had Curt Q20 with rail mountings on old Super Duty. New Super Duty had the puck system, so bought new legs for puck. Although heavy, they are still easy to take in and out. One has to take of head separately due to weight. It should be noted that the puck legs do not lift the hitch up as much as the rail system. I needed to use the highest holes to mount the head.
Tim R.
12/22/2017
Still very pleased. I have been on numerous trips and the hitch continues to work flawlessly. Thanks.
Jim
4/24/2024
Still feel it is a great product. Only feedback is that i wish there was a finer adjustment available for the castle nuts that control the fit to the puck system.
Gary
10/4/2023
Fit my truck nicely. Was not hard to change out even for this 70 year old. Left a bit loose on installation to allow for the feet to align with puck holes. Then everything was tightened up. Very easy to remove and install with my harbor freight motorized winch I installed in garage.
Richard
2/8/2021
Working great. Simplifies the entire process of removing or installing the hitch and is very secure!
Do you have a question about this Accessories and Part?
Condition: Surface Scratches
Notes: There are scratches and paint chips on the legs. Otherwise, new and unused.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Christopher H.
8/14/2026
Looks great in the back of the F250 Kenneth! Do you have the first trip planned yet?