bing tracking image
Q & A Icon

What Measurements are Needed to Find the Correct Dexter E-Z Flex Equalizers for a Trailer  

Updated 06/17/2020 | Published 03/29/2017

Question:

I am looking at E-Z Flex K71-652-00 for my TT. The axle weight is 4400lbs for each. The measurement I have is 33inch center of axle. 6 1/4inch side to side and 3inch up and down. Will the above work or do I need the K71-653-00

0

Expert Reply:

According to the fit specifications, the E-Z Flex # K71-652-00 are to fit tandem axles with 33 inches of axle spacing.

You can also measure your current equalizers to make sure # K71-652-00 will be the correct replacement for your trailer's suspension. The attached picture shows the what dimensions of your current equalizer would have to be to be replaced by either # K71-652-00 or # K71-653-00 E-Z Flex equalizer.

expert reply by:
0
Jared P
click to enlarge
Brian G. profile picture

Brian G.

6/14/2020

Which Dexter E-Z Flex Equalizer Kit is Correct for a 2020 Grand Design Transcend Xplor 260RB with 33" axle spacing and 3500# axles? The current equalizer part number from the Grand Design website for this trailer is 130034.

Chris R. profile picture
Etrailer Expert

Chris R.

6/17/2020

There isn't an E-Z Flex Equalizer Kit available that's designed for 3,500 pound axles. Your best option for upgrading that setup is the Road Armor # LC696740. I wasn't able to track down any info on the equalizer model number you mentioned, so I recommend measuring the space between the two bolt holes on center to make sure it's at or close to 6".

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>