If Running Boards are Installed at the Jacking Points on Sprinter, How Would I Change a Tire?

Question

Question:

I watched you video installing the Aries RidgeStep 96 for the Promaster 136 WB, why does it use the Jack Up points that the Promaster has under the chasis for the first bracket mounting points? If you have this installed like that, how do you ever go about jacking up the Promaster on either the Drivers and Passenger side in the front? This is my only concern about this method of no-drill installation. Are there other jacking points for the front in case we get a flat? Thanks,

asked by: Tom

0

Expert Reply:

Hello Tom,

Great question. The Aries RidgeStep Running Boards w/ Custom Installation Kit # AA2055539 is designed for the Promaster 2500 and 3500 models, it is not listed to fit your 2021 Promaster 1500.

The closest thing we have to the style you were looking at is the Romik Connect RPD-C Running Boards w/ Custom Install Kit - 6" Wide - Black - Aluminum # RMK68FR for the ProMaster 1500 with 136" wheelbase. I reached out to my contact at Romik to ask where they install, they also install at the jacking points, he stated that a lot of his customers upgrade to bottle jacks like the Powerbuilt Unijack Bottle Jack with Built-In Jack Stand - 21" Lift - 6,000 lbs # ALL620471 when they upgrade to running boards.

* Crossmember or subframe forward of the control arms: A strong spot near the front center of the van that can be used if you're using a floor jack.

Would love to know your thoughts on this. What do you think of the Romik's over the Aries?

expert reply by: Kate F

0

Bottle Jack
(click to enlarge)

Kate F.

9/8/2025

Hi Tom, I'm curious to hear what you think about the Romik running boards compared to the Aries ones. Did the suggestion to use a bottle jack like the Powerbuilt Unijack help address your concern about jacking up your Promaster? I'm asking because your experience could really help others in a similar situation.

Tom

9/8/2025

@KateF Hi Kate, I decided to go with Steelcraft Automotive STX600 Running Boards FDMV which is fitted for the Promaster 1500 118" WB. It still fit's the Promaster 1500 136"WB just fine and the instructions were practically the same. It does not use any jack mount as a mounting point so I still have that as a jacking point just in case. It did not seem worth the extra money and effort to get the Bottle Jack mount because if you are in an emergency on the road, you wouldnt want to lug this thing around. It seems like a hassle all-around using the jack mount as the mounting point.

Kate F.

9/8/2025

@Tom Thanks for letting me know Tom! I am happy to hear that you were able to find something that works for your Promaster. Maybe we need to look into getting those running boards added to the site since they do not use the jack mounting points. I really do appreciate you taking the time for the feedback =)

Answer 1

Hey David, thanks for reaching out and providing all of the information! I took a look at all of the running boards that fit your 2018 Ram ProMaster 3500, and they all look to mount in the same locations as the Aries RidgeStep Running Boards w/…

view full answer...

Answer 2

I have a solution for you. I confirmed with Aries that the Aries RidgeStep Running Boards w/ Custom Installation Kit - 6-1/2" Wide #AA2055539 will only fit Ram ProMaster 2500s with a 159 inch wheelbase. With that being said, your best bet is the…

view full answer...

Answer 3

The correct mounting bracket kit for the Aries #AA3048315 ActionTrac motorized running boards is part #AA3025103. The mounting bracket kit includes all the bracketry, wiring, magnetic sensors, control box and hardware needed to install the ActionTrac…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 7

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 8

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 9

Hi Duane; the AeroTread Running Boards #AA2061031 fit the 2025 Durango if you do not have OE side skirts. I believe the R/T comes with the side skirts so they would not fit. For running boards that will fit with the side skirts I recommend the Aries…

view full answer...

If Running Boards are Installed at the Jacking Points on Sprinter, How Would I Change a Tire?

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching