Replacement Bracket/Hardware Kit for Aries AA3048315 ActionTrac Motorized Running Boards

Question

Question:

I have the original running boards for a 2021 GMC 2500HD, had to replace mine with new because of an accident on one side. Can I purchase just the hardware kit brackets, wiring harness, controller, etc.? If so, please provide me with a link.

asked by: Mark J

0

Expert Reply:

The correct mounting bracket kit for the Aries # AA3048315 ActionTrac motorized running boards is part # AA3025103. The mounting bracket kit includes all the bracketry, wiring, magnetic sensors, control box and hardware needed to install the ActionTrac motorized running boards on your 2021 GMC Sierra 2500 Crew Cab.

expert reply by: Mike L

0

Jerry

4/13/2024

Can I purches just 2 replacement brackets?

Mike L.

4/18/2024

@Jerry We checked with Aries for you, and found that unfortunately the brackets aren't available separately. They must be purchased in the # AA3025103 kit. We sure wish we had better news for you!

Answer 1

Hello Tom, Great question. The Aries RidgeStep Running Boards w/ Custom Installation Kit #AA2055539 is designed for the Promaster 2500 and 3500 models, it is not listed to fit your 2021 Promaster 1500. The closest thing we have to the style you were…

view full answer...

Answer 2

Yes the Aries ActionTrac bracket kit part #AA3025170 is the correct fit for your 2015 Jeep Wrangler Unlimited as the correct kit that includes the steps is part #AA3036570.

view full answer...

Answer 3

I have a solution for you. I confirmed with Aries that the Aries RidgeStep Running Boards w/ Custom Installation Kit - 6-1/2" Wide #AA2055539 will only fit Ram ProMaster 2500s with a 159 inch wheelbase. With that being said, your best bet is the…

view full answer...

Answer 4

You do not want to do this. It can damage the hitch but more importantly if it were to fall it could badly injure someone. If you try to lift the whole hitch and base out together it is going to be difficult. All you have to do is unbolt or unpin…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Replacement Bracket/Hardware Kit for Aries AA3048315 ActionTrac Motorized Running Boards

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching