Do You Carry Replacement Springs to Hold on the Camco RV Insect Screen for Atwood Water Heaters?

Question

Question:

I am looking to purchase x6 additional springs for the CAM42145. Do you sell these?

asked by: Charles W

0

Expert Reply:

Hello Charles,

You will want the Replacement Spring Fasteners for Valterra RV Bug Screens - Qty 8 # A10-1370VP. These will work great with the Camco RV Insect Screen for Atwood 6-Gallon and 10-Gallon and Suburban 6-Gallon Water Heater Vents # CAM42145.

Any big trips on the horizon? If so, where are you headed?

expert reply by: Kate F

0

Kate F.

9/12/2025

Hey Charles, did the replacement spring fasteners work out for your insect screen? I'd love to hear your outcome because it could give others confidence when ordering replacements.

Charles W.

9/12/2025

Yes! these were definitely the item I needed to secure the Camco RV Insect Screens to my camping trailer. The more springs to secure the screens the better.

Kate F.

9/13/2025

@CharlesW Awesome Charles! Thanks for letting me know =)

Answer 1

We do not carry any Safe-T-Plus products like the RV steering stabilizer part 41-230, but we do carry, however, the Roadmaster Reflex Steering Stabilizer #RM-RBK24-RSSC. This product is compatible with most class A and class C motorhomes, and comes…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 10

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 11

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Do You Carry Replacement Springs to Hold on the Camco RV Insect Screen for Atwood Water Heaters?

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching