Will Firestone Coil Helpers For 2025 Toyota Land Cruiser Also Fit A 2025 4Runner

Question

Question:

Will the Firestone air bags since they are going to have or have an option for the 2025 4Runner… does it have same coils as the 2024/5 Land Cruiser and will work too? Can you find out. Thanks

asked by: Peter F

0

Expert Reply:

Hello Peter, thanks for reaching out. While the vehicles may be similar, the Firestone coil helper kits for the 2025 Toyota Landcruiser will be different from the kit for a 4Runner. Firestone is currently working on a new kit for the 2025 4Runner, but it is not available quite yet.

If you are looking to beef up the suspension on your 2025 4Runner, consider the following:

- Firestone Coil-Rite Air Helper Springs - Rear Axle - Preorder # F25VV

- Timbren Rear Suspension Enhancement System - Preorder # T32AV

expert reply by: Jesse M

0

Jesse M.

9/12/2025

Hey Peter, did you decide to go with one of the suggested options for your 2025 4Runner's suspension? I'm curious because it could help others who are considering similar upgrades.

Peter F.

9/12/2025

@JesseM I got the timbern bump stops. They work fine but make the ride rough when not towing. Would def take them off if Firestone put out an option for the Landcruoser.

Jesse M.

9/15/2025

@PeterF Ah yes a lot of people say this about Timbrens. Great for load support but not so great for the unloaded factory ride.

Answer 1

Hey Matt, welcome back! The Firestone Coil-Rite Air Helper Springs item #F4124 won't address any of the issues you're having with bumps. They're designed to keep the suspension from flexing when towing or hauling a heavy load with your…

view full answer...

Answer 2

Hello Peter, No, the Toyota 4Runner and the Land Cruiser do not use the same coils. We do have a great option that is maintenance free for your 2025 Toyota Land Cruiser, the SumoSprings Custom Helper Springs - Rear Axle #SS88FJ which has a 1,400…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 10

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Will Firestone Coil Helpers For 2025 Toyota Land Cruiser Also Fit A 2025 4Runner

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching