Replacement Arm for Solera Edge RV Awning

Question

Question:

Hi I am looking for a a support arm for a lippert solera edge not the power side it’s the left side from top to bottom it measures 58 inch

asked by: Andy B

0

Expert Reply:

Hey Andy, we have just what you are looking for with the part # LC62ED which is the correct replacement idler arm for the Solera Edge awning you have.

expert reply by: Jameson C

0

Jameson C.

9/29/2025

Hey Andy, did the replacement idler arm for your Solera Edge awning work out for you? I'd love to hear your outcome to help others in a similar situation.

Answer 1

Hey Travis, We do have replacement arms for your Solera 2000 Series awning. We have both the drive arm and idler arm. The drive arm is the one that houses the motor, the idler is the other side. For the replacement drive arm you want to go with…

view full answer...

Answer 2

Hi Jesus, The number you provided comes back as a Solera Edge awning in black, but we'll need a bit more information to determine the correct arm because there's 3 different models in black. There should be another sticker on the arm with a…

view full answer...

Answer 3

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 4

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 7

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 8

Hey Kelvin, welcome back. To flat tow a 2026 Ford Maverick with your Demco Commander II Tow Bar item #DM9511012, I recommend the following parts: Baseplate Kit - Demco Tabless Base Plate Kit item #DM38CV Wiring Harness - Roadmaster Diode 7-Wire to…

view full answer...

Answer 9

Hi Ken! It looks like you have almost everything you need to set up your 2026 Jeep Gladiator Sahara for flat towing. The etrailer Invisible Base Plate Kit - Removable Arms #e98948 is a perfect fit and the etrailer XHD Non-Binding Tow Bar - RV Mount -…

view full answer...

Answer 10

Hello George, Thanks for writing in. It sounds like the spring bars on your Equal-i-zer system #EQ37120ET are loaded with too much tension, which is why they are staying trapped under the L-brackets and won’t swing outward or lift up easily. This is…

view full answer...

Answer 11

Thanks for your question, James. Both the etrailer #e98948 and Demco #DM9519336 base plates will have a very similar, low-profile look once they’re installed, so neither one really stands out more than the other. They’re both custom-fit for your…

view full answer...

Answer 12

Hey Fred, welcome back. There is no flat towing wiring harness with built in diodes that doesn't require splicing into your Gladiator's lights. You will definitely need the diodes regardless of what flat tow braking system you're using.…

view full answer...

Replacement Arm for Solera Edge RV Awning

Continue Researching